01473 710946
Your Basket is empty
Coastal Logo
Coastal DCC by Modellers for Modellers
=== This product has been discontinued ===
Micro-Decoder Long

DCX77L

CT Elektronik -
Micro-Decoder Long


Current Rating - Avg 0.8 Amps , Peak 1.2 Amps
Connector - Wires
Size - 7.6 x 5 x 1.8 (mm)
Functions - 4 (0.2Amps Total Max)
Asymmetric DCC - Yes
BEMF - Yes

This is the same decoder as the DCX77zD, but with the wires coming out of the short edge rather than the long edge.

The locomotive decoder DCX77L suitable for all DC and AC motors in Z gauge up N locomotives. The maximum total load must not exceed 0, 8A.  The DCX77L offers high-frequency 16 kHz or 32 kHz motor control for Faulhaber motors. Alternatively, there are also infinitely variable 30-150 Hz for traditional engines available.
The DCX77L offers either with 14, 28 or 128 speed steps, load compensation scheme, full address space from 1 to 10240 and the possibility of the main track on-the-fly' program.

  • Full NMRA compatible (DCC data format)
  • DCC data format
  • Full 'function mapping"according to NMRA arrangement
  • Function outputs separately dimmable
  • Dimming frequency 1.2 kHz
  • Automatic disconnection, time control for digital clutch,
  • American light effects, such as flashing, fading, blinking in the push-pull, single pulse strobe, double strobe, flashing headlight, ditch light left ditch light right Rotary beacon, Gyralite, Mars light, soft-start (slow ignition up of functions)
  • Full address space 1-10240
  • Shunting function, display cases mode a button switching function, reduced backwards speed…
  • Evaluation of chain pulses via F1 or F4
  • Free speed curve CV67 to CV94
  • Optimizable load balancing (P and I control)
  • High-frequency motor control 16 kHz or 32 kHz
  • Low-frequency motor control by 30 bis150 Hz selectable
  • Optional 14, 28 or 128 speed steps
  • 0.8 Amp motor current
  • Digital or analog operation
  • 'on the fly' program
  • Hard reset to reset the CV values to factory setting
  • User CV's to the stored personal data
  • Separately adjustable braking time with HLU (also, intermediate)
  • Signal-based train control (HLU Zimo, off)
  • Train number recognition (Zimo, off)
  • Brake with an asymmetrical signal (diode ratio 1:4)
  • Fully programmable with train mouse controls (also values and CVs to 255)
  • Reliable overload protection motor, auxiliary outputs are not protected against overcurrent
  • 2 CVs group freely selectable (for own or third-party applications)

The DCX77z is full NMRA compatible and thus all systems that use the NMRA DCC data format can be used (E.g., Digitrax, Lenz, LGB, Uhlenbrock, Zimo, Roco ' digital is cool', etc.)

Coastal DCC Ltd
Registered Offices: 71 Alan Road, Ipswich IP3 8EY
Registration Number: 9447637 in England & Wales
Terms & Conditions | Privacy | Contact Us | Delivery Policy | Return Policy