Decoders
Silver+ Direct
The DIGITAL plus SILVER locomotive decoder has a built in NMRA 8 pin plug and is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less that have a DCC Medium plug socket.
The characteristics of the decoder... more ...
Current Rating - Avg 1 Amps , Peak 1.8 Amps
Connector - NEM 652 (Direct Plug)
Size - 19 x 13 x 3.35 (mm)
Functions - 5
RailCom - Yes
Asymmetric DCC - Yes
BEMF - Yes
more info on Silver+ Direct...This item is in Stock and available for dispatch
Our Price
£35.87
Gold
The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less.
The characteristics of the decoder are:
Super smooth and silent high frequency back-emf motor... more ...
Current Rating - Avg 1 Amps , Peak 1.8 Amps
Connector - NEM 652
Size - 23 x 16.5 x 6.5 (mm)
Functions - 4 0.2A each
RailCom - Yes
Asymmetric DCC - Yes
BEMF - Yes
more info on Gold...This item appears to not currently be in stock
This item is on back order with our suppliers
Our Price
£40.04
Power 1 for Gold Decoder USP
POWER-1 is an energy storage module for use with GOLD Series decoders. This storage unit supplies the decoder and the locomotive with power when there is an interruption of electrical connection to the track
more info on Power 1 for Gold Decoder USP...This item appears to not currently be in stock
This item is on back order with our suppliers
£48.00
Accessory Decoders
LA010 LS100 adapter
Use with the LS100 to control Tortoise point motors
more info on LA010 LS100 adapter...This item appears to not currently be in stock
This item is on back order with our suppliers
Our Price
£13.19
LS101 4 function turnout decoder Fb
This replaces the Lenz LS100 accessory decoder.
Controls up to four point motors or signals etc.
Includes the ability to add feedback on the switch position over the R, S bus back to a Lenz or compatible command station. The switch or signal... more ...
more info on LS101 4 function turnout decoder Fb...This item is in Stock and available for dispatch
Our Price
£69.49
LS150 6 output accessory decoder
LS150 Accessory decoder for 6 turnouts (LA010 not needed)
The DIGITAL plus LS150 turnout decoder provides cost effective turnout control for up to 6 independent turnouts.
This point decoder requires a separate 16v AC power supply, such as the... more ...
more info on LS150 6 output accessory decoder...This item is in Stock and available for dispatch
Our Price
£53.95
Accessories
15105
LRC100 RailCom Transmitter Module 5 pack
One transmitter module LRC100 is required for every locomotive whose address is to be read out, unless the decoder installed inside the locomotive is already fitted with one of these modules.
more info on LRC100 RailCom Transmitter Module 5 pack...This item appears to not currently be in stock
But is still available to order
£63.85
Brake module BM1
The power to the track section in front of the signal is directed via the BM1. If the signal is at 'Stop', the BM1 generates an asymmetry signal which is detected by some decoders to automatically stop the loco.
more info on Brake module BM1...Only 1 remaining in stock
Our Price
£12.54
Brake module BM2
The BM2 was designed for more demanding model railway operators. It not only allows stopping in front of signals, but also installation of a slow-approach section.
more info on Brake module BM2...This item is in Stock and available for dispatch
Our Price
£48.40
Page (3) of (6)