RR-CirKits - LCC
LCC-LocoNet-Gateway
LCC LocoNet Gateway
LCC-LocoNet Gateway Message level gateway connects the LCC ® CAN bus and the Digitrax LocoNet. Dual RJ45 connectors for LCC ® CAN bus connections. Dual RJ12 connectors for the LocoNet. (stand alone LocoNet optional) Includes internal USB interface for... more ...
LCC
Loconet
more info on LCC LocoNet Gateway...This item is in Stock and available for dispatch
£126.00
lcc-repeater
LCC Repeater
Bit level repeater connects two LCC ® CAN bus segments. Quad RJ45 connectors for dual LCC ® CAN bus loop through connections. Includes a CAN bus data monitor LED for network trouble shooting. 2 LED display. Small package size. Just 2-1/2" x 3-1/2" x... more ...
LCC
more info on LCC Repeater...This item is in Stock and available for dispatch
£50.00
LCC-Tower+Q
Tower-LCC+Q
16 Line Input/Output node for NMRA CAN bus LCC®. PLUS Text based Logic Engine
Support for 16 Input/Output lines.
Includes drive for any combination of:
Up to 16 Input Lines.
Up to 16... more ...
LCC
more info on Tower-LCC+Q...This item appears to not currently be in stock
But is still available to order
£65.50
signal-lcc-32h
Signal LLC Screw Terminals
32 Head signal controller plus 8 line Input/Output node for NMRA CAN bus LCC®
Uses Futaba J (polarized 3 wire) Servo extension cables between signal heads. Requires SSSB (Simple Serial Signal Bus) decoder/drivers at each signal... more ...
LCC
more info on Signal LLC Screw Terminals...This item is in Stock and available for dispatch
£86.00
signal-lcc-p
Signal LLC Pin Terminals
Support for 16 signal LEDs plus 8 I/O lines.
Each signal mast may use as many lamps as required.
Signal connections using 10pin header/li>
Support for 8 Input/Output lines.
I/O lines includes drive for any... more ...
LCC
more info on Signal LLC Pin Terminals...This item is in Stock and available for dispatch
£68.00
signal-lcc-s
Signal LLC Screw Terminals
Support for 16 signal LEDs plus 8 I/O lines.
Each signal mast may use as many lamps as required.
Signal connections using miniture screw terminals/li>
Support for 8 Input/Output lines.
I/O lines includes drive... more ...
LCC
more info on Signal LLC Screw Terminals...This item is in Stock and available for dispatch
£66.00
Computer Interfaces
LCC-USB-N
LCC Buffer USB
Buffered LCC to USB Interface unit. Includes USB Cable.
Note: This unit is NOT for the Digitrax LocoNet see LocoBuffer-NG (Next Generation)
NMRA CAN bus LCC® to USB interface. 2,500 Volt Digital isolation between CAN bus LCC® and USB port.Type... more ...
LCC
more info on LCC Buffer USB...This item is in Stock and available for dispatch
£65.50
Power Management
LCC-VampMeter
LCC Voltmeter and Ammeter
Easily measure your CAN bus power. Size: 1-7/8" x 1-1/8" overall. Dual 4 digit continuous readout. Red and blue display. Includes a short jumper cable to simplify insertion anyplace in your existing network. 4-30VDC 10A* maximum. (* meter only,... more ...
LCC
more info on LCC Voltmeter and Ammeter...Only 1 remaining in stock
£20.10
LCCPP
LCC Power-Point
The LCC Power-Point ties together 2 LCC jacks, a Traffic Monitor, and a power supply. Create a powered LCC bus for simple wiring by powering your LCC Nodes over the cable. The LCC Power-Point supplies 1/2A to each LCC CAN Bus cable. (Terminator and CAN... more ...
LCC
more info on LCC Power-Point...This item is in Stock and available for dispatch
£20.00
LCCTerm
LCC Terminator
May be used to provide the required termination at each end of the CAN bus LCC® Balanced CAN termination provides the best noise rejection. Includes CAN bus Power Indicator and CAN bus data monitor for easy network cable trouble shooting.
Supplied... more ...
LCC
more info on LCC Terminator...This item is in Stock and available for dispatch
£13.50
Page (1) of (2)