Building on the immense succes of the YAMORC YD9401 upgrade for the DR5000, they decided to bring a complete Command Station, the YD7010, that includes the proven YD7001 technology and YD9401 Network Module.
The command station is based on the technology used in the YAMORC YD7001-E, but with a completely new designed mainboard, with improved component choice and PCB layout to render robustness and extended functionality. Of course the YD7010 comes with our YD9401 is pre-installed.
They further improved some visual and usability aspects:
Different colors for the RJ connectors which were easy to confuse when they were all gray. Now the Xbus and Network sockets have different colors to the ES-Link/s88N, LocoNet and Bbus connectors.
The GO- and STOP-LEDs have been moved to the front to be in-line with all LEDs and that prevents touching and/or damaging the LEDs when operating the pushbuttons.
On the back the RS-Bus and Program-Track terminals have been moved into one 4-way block. This effectively prevents the terminals of turning and, worst case, shearing off !
The product placement of the YD7010 in the YAMORC portfolio is meant to be an Entry Level, yet very complete and versatile DCC command station.
Features:
Unique DCC signal generator:
3 A integrated Booster
Operating voltage range from 15 – 19 VDC. Giving a track-voltage of 13.8 – 17.8 Volts. That means safe for your N-scale equipment and powerful for H0.
Multiple Model Railroad compatible Interface Busses:
USB interface for three virtual COM-ports:
The USB connection can also be used to update the YD7100`s firmware
Full network capabilities:
Booster Interface by LocoNet-B with strong, 800mA LocoNet RailSync signals
Powerful 1 Amp XpressNet supply
Roco R-BUS compatible feedbacks on XpressNet socket
IO-Link connector for Command Station extension like YD7101
Clear LED indicators
Programming:
Quality made switch mode power supply included with choise of:
Strong 32-bit ARM processor on 48 MHz
The command station is based on the technology used in the YAMORC YD7001-E, but with a completely new designed mainboard, with improved component choice and PCB layout to render robustness and extended functionality. Of course the YD7010 comes with our YD9401 is pre-installed.
They further improved some visual and usability aspects:
Different colors for the RJ connectors which were easy to confuse when they were all gray. Now the Xbus and Network sockets have different colors to the ES-Link/s88N, LocoNet and Bbus connectors.
The GO- and STOP-LEDs have been moved to the front to be in-line with all LEDs and that prevents touching and/or damaging the LEDs when operating the pushbuttons.
On the back the RS-Bus and Program-Track terminals have been moved into one 4-way block. This effectively prevents the terminals of turning and, worst case, shearing off !
The product placement of the YD7010 in the YAMORC portfolio is meant to be an Entry Level, yet very complete and versatile DCC command station.
Features:
- With priority control and interleaved packet generation.
- Changes sent by any interface are directly being reflected to the track.
- Generates RailCom Cut-Out.
- LocoNet, the world standard set by Digitrax Inc.
- XpressNet, from the inventor of DCC: Lenz
- ES-Link, the next thing after good old S88 signalling.
- YD.Command
- LocoNet
- XpressNet
- WiFi Access Point, gives direct access to smartphones, tablets and handheld controllers
- 100baseT RJ45 wired network socket, connect and bind to your home network and reliably connect your PC software By means of our YD9401 Module, provides:
- Built-in Webserver for configuring and operating the YD7100,
with no need for PC or Phone/Tablet installed Software or Apps. Just runs from any browser ! - 6 different but SIMULTANEOUSLY usable network protocols on WiFi and LAN:
- XpressNet-LAN
- Z21®
- LocoNet Binary
- LocoNet LBServer
- JMRI: WiThrottle
- YD.Command
- 15V fixed / 4 A
- 19V fixed / 3.4A
Manufacturer : YaMoRC
SKU : YD7010
EAN : 6091002074032
SKU : YD7010
EAN : 6091002074032