=== This product has been discontinued ===
STARTFU
Zimo -
This item is not kept in stock, but is ordered in
STARTFU
Zimo - MX10 Wireless Set
This item is not kept in stock, but is ordered in
The MX10 is the central unit of the digital multi-train system Zimo, in other words the "digital office" or the traditional ZIMO called the "base unit".
The ZIMO digital Panel: no big "box", but the latest technology:
At first glance, the very small dimensions fall (18 cm, 3 cm high), as well as the lack of heat sink and fan. Thanks to state-of-the-art Performance Electronics- five high-frequency switching regulators for rail output and auxiliary voltages - the device despite providing 20A to the rails will not run hot (continuous load!) and 5A on the bus.
The ZIMO system offers more than "high power": the processor, storage and software equipment, and high-quality measurement, for example, for the precision RailCom detectors, good connections and the standard integrated radio system make the ZIMO typical functionality possible.
Control Dial : adjust Control Dial : adjust the driving voltages, power, other values, controller, collecting stop (press 2 sec), initiate standby (4 sec)
Display: during normal operation display the driving voltages and currents of the rail outputs, ABA inputs, communication, etc.
Button 1: enable and define "automatic operation", start decoder update, etc.
Button 2: calling MX10 menu (then scroll with dial), start decoder-sound loading, etc.
Button 3: Start of the operation of the MX10 ("BASECAB"), General "Back" - button, etc.
USB socket for USB-stick to the implementation of the auto-update, data loading and secure, decoder-update and sound-download
"SUSI" interface for the ZIMO decoder to the quick sound loading (takes approx. 1 min instead of 10 min)
CAN socket for ZIMO control devices (controllers MX32, i.mx31, i.mx21, MX2) and ZIMO modules (MX8 MX9)
XNET-socket for input devices such as the Roco of Lokmaus, Massoth Dimax Navigator, us other XNET devices
Far left: Large screw terminal for power supply (no transformer) with electrically separate DC output, 25-35 V, 80-600 watts
Medium-sized screw terminal for "Track 1" (main line) up to 12 A
Triple connector for DC voltages "S1" and "S2" (the precursors of the track outputs "Track 1" and "-2")
Small screw terminal for "Track 2" (as a programming and update-track, or as secondary circuit with its own data signal) up to 8 A
above the screw terminals: 8 inputs for ABAs and other contact track receipts, emergency stop buttons, and 6 LED and relay outputs
CAN socket for ZIMO devices with Sync cables to connect with boosters and stone modules
LAN port for Ethernet (E.g. to your Wi-Fi router)
Loconet connector
USB client (to your computer)
WiMi antenna
The ZIMO digital Panel: no big "box", but the latest technology:
At first glance, the very small dimensions fall (18 cm, 3 cm high), as well as the lack of heat sink and fan. Thanks to state-of-the-art Performance Electronics- five high-frequency switching regulators for rail output and auxiliary voltages - the device despite providing 20A to the rails will not run hot (continuous load!) and 5A on the bus.
The ZIMO system offers more than "high power": the processor, storage and software equipment, and high-quality measurement, for example, for the precision RailCom detectors, good connections and the standard integrated radio system make the ZIMO typical functionality possible.
Front Panel
Rear Panel
Manufacturer : Zimo
SKU : STARTFU
SKU : STARTFU