01473 710946
Your Basket is empty
Coastal Logo
Coastal DCC by Modellers for Modellers
Block Occupancy Dectector (BD-2)

800-5502

Circuitron -
Block Occupancy Dectector (BD-2)

The BD-2 is a very sensitive, integrated circuit design block detector which will work with virtually any scale and type of track power. The BD-2 works by detecting the current drawn by a locomotive or lighted piece of rolling stock.

more info on Block Occupancy Dectector (BD-2)...
This item appears to not currently be in stock

Our Price
£15.00


30 Channel Super Tower Master

DTM30

CML Electronics -
30 Channel Super Tower Master

The DTM30 Super Tower Master is a 30 channel point, signal & sensor controller / display unit for automation of layout control panels.

Loconet - Compatible

more info on 30 Channel Super Tower Master...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£63.00


Loco Shuttle

DSS1

CML Electronics -
Loco Shuttle

The DSS1 "LocoShuttle" controls automatic train movements on a LocoNet controlled railway. It provides unattended train movements under automatic control, to create "background activity" or to create part of the operating sequence. It behaves like a... more ...

Loconet - Compatible

more info on Loco Shuttle...
Only 1 remaining in stock

Our Price
£60.00


LED Driver for DAC10/20

DTX8A

CML Electronics -
LED Driver for DAC10/20

This module allows each DAC10 output to show two LEDs: one lit if the output is CLOSED and one lit if the output is THROWN.

more info on LED Driver for DAC10/20...
This item appears to not currently be in stock

Our Price
£15.00


LED Driver for SIGM20

DTX8B

CML Electronics -
LED Driver for SIGM20

This module allows the SIGM20 output to be extended to two extra signals. Alternatively it can control power isolating relays to remove power from the track after a red signal.

more info on LED Driver for SIGM20...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£15.00


2 Pole DPDT Relay Board

RLY2

CML Electronics -
2 Pole DPDT Relay Board

2 pole DPDT relay, PCB mounted

more info on 2 Pole DPDT Relay Board...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£8.50


Sigm20 to BD4 cable

S20CP

CML Electronics -
Sigm20 to BD4 cable

Ribbon cable to connect SIGM20 to 1 or 2 Digitrax BD4 block detector boards.

more info on Sigm20 to BD4 cable...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.00


HO Clean Machine

CMXhoa

CMX -
HO Clean Machine

Clean Machine This all brass tank type track cleaning car, 5 pads included. HO scale.
Solvent proof design (brass construction).
Controllable dispensing rate.
Body mount Kadee couplers.

Requires a cleaning solvent.

more info on HO Clean Machine...
This item appears to not currently be in stock

Our Price
£150.00

Coupling


CMX

CMXna

CMX -
CMX 'N' Clean Machine

Clean Machine, This all brass tank type track cleaning car, 5 pads included. N scale.
Solvent proof designControllable dispensing rateMicrotrains truck & coupler

Requires a cleaning solvent.
Please be aware that... more ...

more info on CMX 'N' Clean Machine...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£150.00


CMX HO Pads

CMXhopads

CMX -
CMX HO Pads

Replacement Cleaning Pads for the HO Clean Machine

more info on CMX HO Pads...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.40


CMX N Pads

CMXnpads

CMX -
CMX N Pads

Replacement Pads for the 'N' Gauge Clean Machine

more info on CMX N Pads...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.00


Self Adhesive Foam Pads

foampads

Coastal DCC -
Self Adhesive Foam Pads

Self adhesive foam pads.
Approx 25mmx12mm
Pack of 10

more info on Self Adhesive Foam Pads...

Our Price
£0.45


Lever with all accessories - unpainted

DCP-CBS

DCC Concepts -
Lever with all accessories - unpainted

Bring a sense of reality to the control of model railways. This point lever has the look and feel of
the railway with the quality in action that tradition requires.

This can be used with any scale, prototype and technology the modeller chooses.... more ...

more info on Lever with all accessories - unpainted...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£18.40

Qty


Cobalt S - Number Pack

CS99

DCC Concepts -
Cobalt S - Number Pack

Etched brass numbers from 1-99, for use with the Cobalt CBS

more info on Cobalt S - Number Pack...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£12.50


Cobalt Switch Pack

CMS-S

DCC Concepts -
Cobalt Switch Pack

This pack includes 6x SPDT (toggle) switches and a nice assortment of chromed brass mount 3mm LEDs for panel mounting.

more info on Cobalt Switch Pack...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£15.00


Cobalt Switch Pack Panel (Red)

CMS-R

DCC Concepts -
Cobalt Switch Pack Panel (Red)

Three specially prepared DPDT toggle switches, with PCBs, that are ready for Cobalt operation. Supplied with six red 3mm chrome bezel mounted LEDs to give a very professional look to your control panel. (Use for all Cobalt Classic, Cobalt Classic ? or... more ...

more info on Cobalt Switch Pack Panel (Red)...
This item appears to not currently be in stock
This item is on back order with our suppliers

Our Price
£13.20


Cobalt Switch Pack Panel (Green)

CMS-G

DCC Concepts -
Cobalt Switch Pack Panel (Green)

Three specially prepared DPDT toggle switches, with PCBs, that are ready for Cobalt operation. Supplied with six green 3mm chrome bezel mounted LEDs to give a very professional look to your control panel. (Use for all Cobalt Classic, Cobalt Classic ? or... more ...

more info on Cobalt Switch Pack Panel (Green)...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£11.00


Cobalt Switch Pack Assortment

CMS-A

DCC Concepts -
Cobalt Switch Pack Assortment

Contents:


3x DPDT switches pre-fitted to a small PCB which provides the power input point, reversing connections needed for control and connection points for LEDs with resistors already fitted.
6x red 3mm LEDs and... more ...

more info on Cobalt Switch Pack Assortment...
This item appears to not currently be in stock
This item is on back order with our suppliers

Our Price
£10.75


Cobalt DIGITAL Switch Pack & LED Selection

CMS-D

DCC Concepts -
Cobalt DIGITAL Switch Pack & LED Selection

Six (x6) SPST momentary action push-button switches that are perfect for AD Series accessory decoders or Cobalt Digital operation. Supplied with a wide assortment of LEDs including red and green chrome bezel mounted LEDs to give a very professional look... more ...

more info on Cobalt DIGITAL Switch Pack & LED Selection...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£19.00


COBALT ALPHA MRC/Gaugemaster Prodigy Interface

GMX

DCC Concepts -
COBALT ALPHA MRC/Gaugemaster Prodigy Interface

Only 1 remaining in stock

Our Price
£14.95


COBALT ALPHA Lenz Interface

LZX

DCC Concepts -
COBALT ALPHA Lenz Interface

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£14.95


COBALT ALPHA Extension Display

ADX

DCC Concepts -
COBALT ALPHA Extension Display

The Cobalt Alpha main unit has a digital display that repeats commands and displays the accessory number that has been operated. We knew that modellers will want to have an extension display visible on their control panel so we created this economical... more ...

more info on COBALT ALPHA Extension Display...
Only 1 remaining in stock

Our Price
£20.00


COBALT ALPHA Main Unit

AEU

DCC Concepts -
COBALT ALPHA Main Unit

DCCconcepts Cobalt Alpha is a digital encoder that turns any form of standard switch into a digital control device, making it possible to create complex control panels with simple wiring in fact you will need only one pair of wires between your panel and... more ...

more info on COBALT ALPHA Main Unit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£55.00


Cobalt Alpha Central

AEC

DCC Concepts -
Cobalt Alpha Central

The ultimate in simple-to-install control panels. Take it out of the box, plug it into your command bus with the cable supplied and your installation is finished. It is usable with DCC and even DC modellers can adopt it if they use an accessory bus for... more ...

more info on Cobalt Alpha Central...
This item appears to not currently be in stock

Our Price
£130.00


Solenoid Decoder Converter - 3 Wire to 2 Wire DC

DCD-SDC

DCC Concepts -
Solenoid Decoder Converter - 3 Wire to 2 Wire DC

The SDC is a clever small device that takes the outputs from a 3-wire accessory decoder and turns them into a 2-wire reversing DC decoder output, allowing you to use most solenoid accessory decoders to power Kato, Cobalt, Circuitron or other brands of... more ...

more info on Solenoid Decoder Converter - 3 Wire to 2 Wire DC...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£8.00

Qty


Cobalt Alpha 3 Wire RGB Ribbon

DCD-RGB

DCC Concepts -
Cobalt Alpha 3 Wire RGB Ribbon

A 5m length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) . Each wire is equivalent to 16x 0.2 and it is also ideal for connection of Cobalt iP Digital motors by using the red/black for... more ...

more info on Cobalt Alpha 3 Wire RGB Ribbon...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£6.50


Alpha Curly Cord

DCD-ACL

DCC Concepts -
Alpha Curly Cord

RJ12 6pin Curly Cord For Powercab and Cobalt Alpha – 2m/6ft

2m/6ft curly cable with RJ12 connectors that can be used for Alpha panel or Power Cab connections.

PowerCab -

more info on Alpha Curly Cord...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£7.50


Cobalt Alpha Switch Add on Pack (12 x Green)

DCP-ATG

DCC Concepts -
Cobalt Alpha Switch Add on Pack (12 x Green)

DCC Concepts have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle.
Each pack contains:

12 x... more ...

more info on Cobalt Alpha Switch Add on Pack (12 x Green)...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£22.00


Cobalt Alpha Switch Add on Pack (12 x Red)

DCP-ATR

DCC Concepts -
Cobalt Alpha Switch Add on Pack (12 x Red)

DCC Concepts have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle.
Each pack contains:

12 x... more ...

more info on Cobalt Alpha Switch Add on Pack (12 x Red)...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£22.00


Alpha Direct DCC Interface

DCD-SNX

DCC Concepts -
Alpha Direct DCC Interface

The Alpha Sniffer is a simple and economical way to add a separate DCC Accessory power bus to a layout. It works equally well for DCC or DC users who wish to employ Alpha, Alpha Mimic or Cobalt Digital products.

Also makes the perfect "Sniffer"... more ...

more info on Alpha Direct DCC Interface...
Only 1 remaining in stock

Our Price
£24.50


Alpha Panel

DCD-DAP

DCC Concepts -
Alpha Panel

Alpha Panel Layout panel for NCE and Roco

Alpha-Panel is a universal Command bus extension panel designed for use with all DCC systems that utilise RJ-12 RS485-type command bus structures.

Alpha-Panel is of course the perfect choice for Cobalt... more ...

PowerCab -

more info on Alpha Panel...
Only 1 remaining in stock

Our Price
£16.75


Terminal Strip 12-Way Pluggable (2 Pairs)

DCC-Strip

DCC Concepts -
Terminal Strip 12-Way Pluggable (2 Pairs)

Terminal Strip 12-Way Pluggable (2 Pairs)

Two pairs of 12 way pluggable connectors, suitable for heavy power connection between baseboards or perhaps the creation of an ‘easy disconnection’ structure between DCC systems and layout, these heavy... more ...

more info on Terminal Strip 12-Way Pluggable (2 Pairs)...
Only 1 remaining in stock

Our Price
T.B.C

Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)

DCP-CBSGR

DCC Concepts -
Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)

SIX plug & play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs.

Please use with an SPS-12 split-rail power supply.

more info on Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
T.B.C

3x MEDIUM Cobalt-SS Extension leads

DCP-CBSML

DCC Concepts -
3x MEDIUM Cobalt-SS Extension leads

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board.

Contains 3 x 600mm extension cables.

more info on 3x MEDIUM Cobalt-SS Extension leads...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
T.B.C

Cobalt-S Spares

DCP-CSA

DCC Concepts -
Cobalt-S Spares

Cobalt-S Spares (Harnesses and PCBs) (3 Pack) Three spare harnesses and connection PCB’s for Cobalt-S wiring.

more info on Cobalt-S Spares...
Only 1 remaining in stock

Our Price
T.B.C

Cobalt-S Cosmetic Parts

DCP-CSD

DCC Concepts -
Cobalt-S Cosmetic Parts

Cobalt-S Cosmetic Parts (Top Castings x6) (Numbers x12) Spare etched brass numbers and cast metal ribbing for Cobalt-S.

more info on Cobalt-S Cosmetic Parts...
Only 1 remaining in stock

Our Price
T.B.C

High Quality Power Bus Strippers

DCT-BWS

DCC Concepts -
High Quality Power Bus Strippers

High Quality Power Bus Strippers.

DCCconcepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can also do it with NO need for cuts and breaks in it at all with this... more ...

more info on High Quality Power Bus Strippers...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
T.B.C

AlphaSwitch-A

DCD-AS

DCC Concepts -
AlphaSwitch-A

These switches are designed to operate point motors or accessories which require a reversible power supply (Cobalt Motors). Each switch output is normally closed (or ON) so they are ideal for circuits which require a permanent supply. Connection couldn't... more ...

more info on AlphaSwitch-A...

Colour


AlphaSwitch-D

DCD-DS

DCC Concepts -
AlphaSwitch-D

These switches are designed to operate digital devices such as the Cobalt IP Digital motors, Accessory Decoders (FX Series) and the REX Relay Extension Boards. Each switch output is normally open (or OFF) so they can be used in conjunction with computers... more ...

more info on AlphaSwitch-D...

Colour


Alpha Mimic Add-On LED

DCD-ML

DCC Concepts -
Alpha Mimic Add-On LED

The add-on pack for Alpha Mimic contains 24 LEDs, 6x extension cables and 3x 6-way adapters.

more info on Alpha Mimic Add-On LED...

Colour


Alpha Mimic Panel Controller

DCD-MP

DCC Concepts -
Alpha Mimic Panel Controller

Alpha Mimic is a fully plug and play product with no need for soldering or complicated wiring. Mimic simply connects to the DCC power bus with two wires.

As it reads all the DCC commands it accurately shows the status / direction of your points /... more ...

more info on Alpha Mimic Panel Controller...

Colour


Tortoise Buddy Baby

TB-ba

DCC Specialties -
Tortoise Buddy Baby

Wires Directly to Track to Power Tortoise
Compatible with Any Type of Track Power, Compatible with DCC, not DCC Controlled
Screw Terminal Connections for LEDs and SPDT, DPDT Switches
Incorporates Auto Throw

more info on Tortoise Buddy Baby...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.50


Tortoise Buddy Senior

TB-sr

DCC Specialties -
Tortoise Buddy Senior

Wires Directly to Track to Power Tortoise
Compatible with Any Type of Track Power, Compatible with DCC, not DCC Controlled
Screw Terminal Connections for LEDs and SPDT, DPDT Switches
Incorporates Auto Throw

more info on Tortoise Buddy Senior...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.00


Tortoise Buddy Wiz-Kid

TB-wk

DCC Specialties -
Tortoise Buddy Wiz-Kid

Wires Directly to Track to Power Tortoise
Compatible with Any Type of Track Power, Compatible with DCC, not DCC Controlled
Screw Terminal Connections for LEDs and SPDT, DPDT Switches
Incorporates Auto Throw

more info on Tortoise Buddy Wiz-Kid...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£12.00


Universal UTP

TTX UTP

DCC Specialties -
Universal UTP

Loconet - Compatible
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£17.40


LOCONET UNIVERSAL PANEL

UP5

Digitrax -
LOCONET UNIVERSAL PANEL

Two RJ12 6 pin LocoNet jacks in the back of the panel for hooking up LocoNet devices that use RailSync. (These are refered by some LocoNet systems as LocoNet B)

Two RJ12 6 pin Throttle jacks in the front of the panel for hooking up throttles and... more ...

more info on LOCONET UNIVERSAL PANEL...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£13.80


UR90 INFRARED RECEIVER

UR90

Digitrax -
UR90 INFRARED RECEIVER

The UR90 also looks similar to a UP5 and is mounted in the fascia of the layout. The UR90 is simply an addition to your existing LocoNet so no additional wiring is needed.

more info on UR90 INFRARED RECEIVER...
This item appears to not currently be in stock

Our Price
£38.00


UR92 - Duplex Receiver

ur92ce

Digitrax -
UR92 - Duplex Receiver

The UR92CE Duplex Radio/IR receiver lets you run your trains without plugging in. Using your Duplex equiped "DCE" throttle and you're ready to go. Also equipped with an IR receiver the UR92CE this allows you to go tetherless with your InfraReady... more ...

more info on UR92 - Duplex Receiver...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£135.00

Power Supply


LocoNet Repeater

LNRP

Digitrax -
LocoNet Repeater

The LNRP Isolates segments of your LocoNet layout - Protects segments of your LocoNet layouts - Extends large LocoNet installations of more than 20 devices - Acts as a Diagniostic tool if LocoNet network problems occur.

more info on LocoNet Repeater...
This item appears to not currently be in stock

Our Price
£55.80

Power Supply


Signal Mast Base Kit

SMBK

Digitrax -
Signal Mast Base Kit

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.

more info on Signal Mast Base Kit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£13.00


Signal Mounting Hardware Kit

SMHK

Digitrax -
Signal Mounting Hardware Kit

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals.

more info on Signal Mounting Hardware Kit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£6.25


Signal Terminal Mtg Strip

TSMK

Digitrax -
Signal Terminal Mtg Strip

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout.

more info on Signal Terminal Mtg Strip...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£12.00


LocoNet Tester

LT1

Digitrax -
LocoNet Tester

This is included in all Digitrax Starter Sets.It consistes of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack and a 100 Ohm 2watt protection resistor.

more info on LocoNet Tester...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£3.50


Universal Panel and 3 Amp Z Scale Voltage Reducer

UP6Z

Digitrax -
Universal Panel and 3 Amp Z Scale Voltage Reducer

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer

6 LocoNet Jacks for use with all scales

Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive opreration with Digitrax equipment

more info on Universal Panel and 3 Amp Z Scale Voltage Reducer...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£23.10


Battery Cover Replacement

BatCov

Digitrax -
Battery Cover Replacement

Replacement Battery Cover for the DT40x series of throttles

more info on Battery Cover Replacement...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£8.00


LocoNet Cable Maker Kit

LNCMK

Digitrax -
LocoNet Cable Maker Kit

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£39.72


LokProgrammer

53451

ESU -
LokProgrammer

You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer!
One prerequisite: A PC with sound card and... more ...

more info on LokProgrammer...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£144.00


ECoS L.Net Adapter

50097

ESU -
ECoS L.Net Adapter

The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld... more ...

more info on ECoS L.Net Adapter...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£86.00


USB to RS232 Cable For LokProgrammer

51952

ESU -
USB to RS232 Cable For LokProgrammer

Cable USB-A 2.0 FTDI to RS232; 1.80m, for LokProgrammer

more info on USB to RS232 Cable For LokProgrammer...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£16.90


Smoke Unit

54678

ESU -
Smoke Unit 'O' Gauge

For many modellers running their trains in the garden smoke generators are a must. Besides sound reproduced by the LokSound XL decoders one finds the exhaust smoke synchronous with the exhaust chuffs most exciting. Prototype diesel locomotives... more ...

more info on Smoke Unit 'O' Gauge...
This item appears to not currently be in stock

Our Price
£70.00


Smoke Unit

54679

ESU -
Smoke Unit 'G' Gauge

For many modellers running their trains in the garden smoke generators are a must. Besides sound reproduced by the LokSound XL decoders one finds the exhaust smoke synchronous with the exhaust chuffs most exciting. Prototype diesel locomotives... more ...

more info on Smoke Unit 'G' Gauge...
Only 1 remaining in stock

Our Price
£80.00


Miniature Relay

51963

ESU -
Miniature Relay

This small relay allows you to control loads whose draw exceeds the decoder’s function output.

1A, 16v

more info on Miniature Relay...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.88


ECoSlink Terminal

50099

ESU -
ECoSlink Terminal

If your train layout is growing and you need additional ECoSBoost boosters and ECoSDetector feedback modules to connect to your ECoS command station, and you are running out of connectors, you should buy the ECoSlink Terminal.
More... more ...

more info on ECoSlink Terminal...
Only 1 remaining in stock

Our Price
£75.00


Decoder Tester

53900

ESU -
Decoder Tester

May be you know the situation: In front of you there is a digital decoder on the workbench, and before you undertake its complicated installation into the loco, you would like to know if the decoder works as advertised. But, how do you test it? The... more ...

more info on Decoder Tester...
This item appears to not currently be in stock

Our Price
£41.00


Decoder Tester Extension

53901

ESU -
Decoder Tester Extension

If necessary, you can add the Decoder Tester Extension to your Profi Decoder Tester V2.0: Plugged into the side of the Decoder Tester V2.0 it enables you to comfortably test all large scale decoders.

If you also have to deal with large scale... more ...

more info on Decoder Tester Extension...
This item appears to not currently be in stock

Our Price
£22.00


Prodigy Extension Plate

DCC11

Gaugemaster -
Prodigy Extension Plate

2 port extension plate for plug-in locations around your layout for the Walkabout unit. Cable length 3m.

more info on Prodigy Extension Plate...
Only 1 remaining in stock

Our Price
£32.00


Controller Caddy

DCC66

Gaugemaster -
Controller Caddy

Plastic holster for your Walkaround controller OR mobile phone that you screw to the side of your baseboard. Fits most brands. Comes complete with screws.

more info on Controller Caddy...
Only 1 remaining in stock

Our Price
£6.50


Prodigy Universal Lead

dcc62

Gaugemaster -
Prodigy Universal Lead

This item is in Stock 2-4 Working Days Delivery Available

Our Price
T.B.C

Crimp Tool

RJ12Crimp

General Electronics -
Crimp Tool

Crimp tool suitable for crimping RJ12 Connectors as used with Digitrax Loconet Cables

more info on Crimp Tool...
This item appears to not currently be in stock

Our Price
£20.00


LocoNet Coupler

RJ12-InLine

General Electronics -
LocoNet Coupler

In-line RJ12 Coupler, Ideal for connecting Loconet or Cab Bus cables together at board joins

more info on LocoNet Coupler...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.40


PowerCab Digital Encoder

3315C-001-006Li

General Electronics -
PowerCab Digital Encoder

Replacement Rotarty Encoder for the NCE PowerCab/Pro Cab.
We do offer a supply and fit service for this part, contact us for more information.

more info on PowerCab Digital Encoder...

Our Price
£5.40


Ratio signal motorising kit

SBR

Harman DCC -
Ratio signal motorising kit

Servo based ratio signal motorising kit. Fits in a hole drilled in the baseboard and allows a Ratio signal to be dropped in. No linkage required so the Ratio signal can be removed when not in use and stored so ideal for portable layouts. Works with up to... more ...

more info on Ratio signal motorising kit...
This item appears to not currently be in stock

Our Price
£18.50


LA152 Fascia Panel

80152

Lenz -
LA152 Fascia Panel

Fasica Plate for for connecting additional Handsets to XpressNet.
Two five-pin DIN sockets and one RJ12 socket at the front.
Two RJ12 sockets and a Screw Terminal at the rear.
Includes XpressNet Cable

more info on LA152 Fascia Panel...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£20.00


LY006 XpressNet Cable

80006

Lenz -
LY006 XpressNet Cable

XpressNet Cable
Fitted with a RJ12 Connector and a 5pin Din Plug
Has a 3mtr Length when fully extended

more info on LY006 XpressNet Cable...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.20


LY160 XpressNet Cable 2.5Mtr

80160

Lenz -
LY160 XpressNet Cable 2.5Mtr

XpressNet Cable 2.5Mtr
Fitted with RJ12 connectors at each end.

more info on LY160 XpressNet Cable 2.5Mtr...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£6.50


LY161 XpressNet Cable 5Mtr

80161

Lenz -
LY161 XpressNet Cable 5Mtr

XpressNet Cable 5Mtr
Fitted with RJ12 Connectors at each end

more info on LY161 XpressNet Cable 5Mtr...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.50


Brake module BM1

22600

Lenz -
Brake module BM1

The power to the track section in front of the signal is directed via the BM1. If the signal is at 'Stop', the BM1 generates an asymmetry signal which is detected by some decoders to automatically stop the loco.

more info on Brake module BM1...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.65


Brake module BM2

22610

Lenz -
Brake module BM2

The BM2 was designed for more demanding model railway operators. It not only allows stopping in front of signals, but also installation of a slow-approach section.

more info on Brake module BM2...
Only 1 remaining in stock

Our Price
£42.00


Brake module BM3

22620

Lenz -
Brake module BM3

The BM3 is a BM2 module equipped with a block-section function that allows lifelike block-section operation. The number of blocks is unlimited as each block requires a separate BM3 module. The BM3 has 2 outputs to connect light signals.

more info on Brake module BM3...
Only 1 remaining in stock

Our Price
£50.00


BMA Adaptor for block module BM3

22630

Lenz -
BMA Adaptor for block module BM3

BMA Adaptor for block module BM3

This adaptor serves to connect signals with double coil (Solenoid) drives or motorised signals to the block-section module BM3

more info on BMA Adaptor for block module BM3...
Only 1 remaining in stock

Our Price
£20.50


LRC100 RailCom Transmitter Module 5 pack

15105

Lenz -
LRC100 RailCom Transmitter Module 5 pack

One transmitter module LRC100 is required for every locomotive whose address is to be read out, unless the decoder installed inside the locomotive is already fitted with one of these modules.

more info on LRC100 RailCom Transmitter Module 5 pack...
Only 1 remaining in stock

Our Price
£63.85


LG100 Brake Module

22500

Lenz -
LG100 Brake Module

The brake generator LG100 serves to simulate real-life starting and stopping in front of and behind the signal.
Contrary to ABC braking modules, the brake generator LG100 influences all locomotive decoders, not only Gold decoders. The LG100 is the... more ...

more info on LG100 Brake Module...
Only 1 remaining in stock

Our Price
£51.00


LY145 Expansion set for LW150 module

80145

Lenz -
LY145 Expansion set for LW150 module

Ribbon cable and 32 yellow LEDs for illuminating the accessories on a mimic panel

more info on LY145 Expansion set for LW150 module...
Only 1 remaining in stock

Our Price
£12.00


Auto Switch, P-Cab Program Trk

524-226

NCE -
Auto Switch, P-Cab Program Trk

Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode (does not affect Program on Main). Compatible with ALL DCC systems such as DigitraxTM Big Boy,... more ...

PowerCab -

more info on Auto Switch, P-Cab Program Trk...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£20.00


Mini Panel for DCC Accessories

524-230

NCE -
Mini Panel for DCC Accessories

Use one button to control multiple switches or macros on your NCE DCC system

more info on Mini Panel for DCC Accessories...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£42.60


PowerCab Panel

pcp

NCE -
PowerCab Panel

Add a separate PCP panel to operate your Power Cab in other places or on other layouts.

The panel includes the plugable screw connector to the track.

PowerCab -

more info on PowerCab Panel...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£18.00


UTP Panel

524-207

NCE -
UTP Panel

Expand the number of operator points around the layout with the UTP.

Can also be used with the PowerCab system for a slave unit.

Connecting cab bus cable sold separately.

more info on UTP Panel...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£18.60


Coil Cord Din

524-208

NCE -
Coil Cord Din

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£13.80


UTP Panel Cat5

524-234

NCE -
UTP Panel Cat5

Expand the number of operator points around the layout with the UTP.

This panel uses a RJ45-CAT5 connector at the rear, but still retains the traditional RJ12 connectors at the front for the handsets.

Use a Cat5-Cab Bus Adapter to convert the RJ12 Cab... more ...

more info on UTP Panel Cat5...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£21.00


Cat5-Cab Bus Adapter

524-235

NCE -
Cat5-Cab Bus Adapter

Converts the standard RJ12 connector used on NCEs cab bus system so that standard RJ45 Cat5 cabling can be used to connect the various UTP panels together

more info on Cat5-Cab Bus Adapter...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£8.30


Snubber

524-305

NCE -
Snubber

A pack of 2 DCC Track Bus Noise Suppressor.

Reduces or eliminates voltage spikes on long runs of DCC bus wire. This is especially important on any DCC track bus wire 40 feet or longer. Protects decoders from damaging inductive voltage spikes. Solve... more ...

more info on Snubber...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.38


Throttle Pocket

nrm-40020

New Rail Models -
Throttle Pocket

Holder for your throttle fits handsets from Digitrax, NCE, Lenz & MRC/Gaugemaster.

more info on Throttle Pocket...
This item appears to not currently be in stock

Our Price
£6.50


Throttle Pocket - Packet 3

nrm-40020-3

New Rail Models -
Throttle Pocket - Packet 3

Holder for your throttle fits handsets from Digitrax, NCE, Lenz & MRC/Gaugemaster.

more info on Throttle Pocket - Packet 3...
This item appears to not currently be in stock

Our Price
£18.00


Throttle Pocket - Packet 10

nrm-20020-10

New Rail Models -
Throttle Pocket - Packet 10

Holder for your throttle fits handsets from Digitrax, NCE, Lenz & MRC/Gaugemaster.

more info on Throttle Pocket - Packet 10...

Our Price
£62.00


Cup Holder - Pack 5

nrm-40021-5

New Rail Models -
Cup Holder - Pack 5

This item appears to not currently be in stock

Our Price
£50.00


LocoNet Control Point

LNCP

RR-CirKits -
LocoNet Control Point

This single board includes all the inputs and outputs necessary to signal a complete passing siding. The LNCP communicates over the LocoNet compatible serial port with other LNCP units or other LocoNet compatiple devices.

more info on LocoNet Control Point...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£65.00


Fan Out Board A

FOB-A

RR-CirKits -
Fan Out Board A

This board is specifically designed to direct drive eight LED's from a single LNCP port. It includes on board locations for current limiting resistors and jumpers to select common anode or common cathode connections.

more info on Fan Out Board A...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.61


Fan-Out-Board B

FOB-B

RR-CirKits -
Fan-Out-Board B

Fan Out Board Signal Demultiplexer
This board is specifically designed to connect four signal heads from a single LNCP board output. No extra hardware is required at each signal head.T

more info on Fan-Out-Board B...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.20


Single Coil Solenoid Driver

SCSD-8

RR-CirKits -
Single Coil Solenoid Driver

This 8 line, optically isolated, single ended, high current, high voltage DC driver can drive up to 1A continous per line at up to 30VDC.

This board will drive 4 dual-coil solenoid switch machines

more info on Single Coil Solenoid Driver...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£31.00


Stall Motor Driver

SMD-8

RR-CirKits -
Stall Motor Driver

Stall motor driver for up to 8 motors

more info on Stall Motor Driver...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£30.00


1 to 5 LocoNet Splitter

6P6C

RR-CirKits -
1 to 5 LocoNet Splitter

5 Jacks, 6 Position, 6 Conductor, (6P6C) modular jack with 6' cord and plug. Straight through wiring. Screw mounting flanges for easy under layout or fascia mounting. Use to extend your modular control bus and provide easy taps for those extra devices.

more info on 1 to 5 LocoNet Splitter...
Only 1 remaining in stock

Our Price
£6.60


TowerMan

towerman

RR-CirKits -
TowerMan


Support for 16 Input/Output lines.
Includes drive for any combination of:

Up to 16 Input Lines.
Up to 16 Output Lines.

Internal Logic Blocks... more ...

more info on TowerMan...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£41.00


Signal Man Compression Connectors

signalmanc

RR-CirKits -
Signal Man Compression Connectors

Two versions SignalMan-P (pin connectors) SignalMan-C (Compression Connectors).
Direct drive for up to 16 LEDs.
Includes drive for any combination of:

Up to 16 Common Anode or Common Cathode... more ...

more info on Signal Man Compression Connectors...
Only 1 remaining in stock

Our Price
£30.00


Signal Man Pin Connections

signalmanp

RR-CirKits -
Signal Man Pin Connections

Two versions SignalMan-P (pin connectors) SignalMan-C (Compression Connectors).
Direct drive for up to 16 LEDs.
Includes drive for any combination of:

Up to 16 Common Anode or Common Cathode... more ...

more info on Signal Man Pin Connections...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£26.00


Simple Serial Bus Gateway

ssbgateway

RR-CirKits -
Simple Serial Bus Gateway

The SSB Gateway ties together 5 LocoNet jacks, two Simple Serial Bus plugs, and a power supply.

Can be used for a Standalone LocoNet system on non Digitrax Systems

more info on Simple Serial Bus Gateway...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£27.00


Tower Controller Mk2

TC-MK2

RR-CirKits -
Tower Controller Mk2

64 line I/O controller in blocks of 8 lines. Each line may drive up to 15ma @4.5V when configured as an output. Equipped with 4.7K pull up resistors to allow use with contacts, open collector, or logic level circuits when configured as an input.

more info on Tower Controller Mk2...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£121.20


SSB-Adapter

SSB-a

RR-CirKits -
SSB-Adapter

The SSB Adapter ties together 2 LocoNet jacks, one Simple Serial Bus terminal, and a power supply.

more info on SSB-Adapter...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£16.00


MotorMan

MotorMan

RR-CirKits -
MotorMan


Support for 16 Input/Output lines.
Includes drive for any combination of:
Up to 16 Input Lines.
Up to 16 Output Lines.
Internal Logic Blocks with up to 32 conditional... more ...

more info on MotorMan...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£50.00


Snap Track Mount

3TK2-2

RR-CirKits -
Snap Track Mount

Mounting track for two I/O modules

more info on Snap Track Mount...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.75


Snap Track

3TK2-4

RR-CirKits -
Snap Track

Mounting track for four I/O modules

more info on Snap Track...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£9.50


Fan Out Board, Dual Direct

FOB-C

RR-CirKits -
Fan Out Board, Dual Direct

This board is specifically designed to terminate the dual cable, eight stall motor, connections from a single SMD-8 board.

more info on Fan Out Board, Dual Direct...
This item appears to not currently be in stock

Our Price
£13.85


Input Output Test Board

I/O Test

RR-CirKits -
Input Output Test Board

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£6.42


Single Snaptrack mount

3TK2-1

RR-CirKits -
Single Snaptrack mount

This item appears to not currently be in stock

Our Price
£2.63


Signal Man Screw Connectors

signalmans

RR-CirKits -
Signal Man Screw Connectors

DCC or Simple Serial Bus
Signal Head Driver

more info on Signal Man Screw Connectors...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£29.00


Tortise Adapter Board 2 Position

TAB-2

RR-CirKits -
Tortise Adapter Board 2 Position

Tortoise Adapter Board - 2 position. The TAB-2 is a quick wiring connector for the Tortoise Slow Motion Switch Machine. It is composed of a properly designed edge connector* that fits tightly onto the Tortoise paddle, two daisy chained 10 pin IDC... more ...

more info on Tortise Adapter Board 2 Position...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£11.80


Tortoise Adapter Board - 3 position

TAB-3

RR-CirKits -
Tortoise Adapter Board - 3 position

Tortoise Adapter Board - 3 position. The TAB-3 is a quick wiring connector for the Tortoise Slow Motion Switch Machine when used for a three position semaphore. It is composed of a properly designed edge connector* that fits tightly onto the Tortoise... more ...

more info on Tortoise Adapter Board - 3 position...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£9.20


LCC Power-Point

LCCPP

RR-CirKits -
LCC Power-Point

The LCC Power-Point ties together 2 LCC jacks, a Traffic Monitor, and a power supply. Create a powered LCC bus for simple wiring by powering your LCC Nodes over the cable. The LCC Power-Point supplies 1/2A to each LCC CAN Bus cable. PS-S-15-1000... more ...

more info on LCC Power-Point...
Only 1 remaining in stock

Our Price
£17.00


LCC Terminator

LCCTerm

RR-CirKits -
LCC Terminator

May be used to provide the required termination at each end of the CAN bus LCC® Balanced CAN termination provides the best noise rejection. Includes CAN bus Power Indicator and CAN bus data monitor for easy network cable trouble shooting.

more info on LCC Terminator...
Only 1 remaining in stock

Our Price
£12.00


Tower-LCC

Tower-LCC

RR-CirKits -
Tower-LCC


Support for 16 Input/Output lines.
Includes drive for any combination of:

Up to 16 Input Lines.
Up to 16 Output Lines.

Internal Logic Blocks... more ...

more info on Tower-LCC...
Only 1 remaining in stock

Our Price
£60.00


Snap Track Mount

3TK2-3

RR-CirKits -
Snap Track Mount

Mounting track for three I/O modules

more info on Snap Track Mount...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£7.16


Relay Board - 4

RB-4

RR-CirKits -
Relay Board - 4

Relay Board - 4 is a Quad 10A SPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, LNCP, or other logic output devices. It requires 12V auxilary power to supply the relay coils. Auxilary power is optically isolated... more ...

more info on Relay Board - 4...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£25.00


LEDecoder Lighting Decoder

LED001

Tam Valley -
LEDecoder Lighting Decoder

This 3 ouput Accessory Decoder for LEDs has numerous uses. It uses 2 DCC addresses.

Can be used for DCC controlled
Signalling
Building Lights
Passenger Coaches

The flicker function imiitates arc welding, flickering lights and... more ...

more info on LEDecoder Lighting Decoder...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£12.50


SwitchWright Servo Bracket Kit,

SWR001

Tam Valley -
SwitchWright Servo Bracket Kit,

The SwitchWright is a newly designed servo bracket made out of laser-cut aircraft-grade plywood to make it rigid and durable. It holds the servo securely with two screws.

more info on SwitchWright Servo Bracket Kit,...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.80


Servo Reverser

SRR001

Tam Valley -
Servo Reverser

You can often reverse your servo throw direction by turning it around or reversing the servo linkage. Sometimes there just isn't room under a turnout to do this. You can't reverse the servo direction by swapping wires.

more info on Servo Reverser...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£3.50


Dual 3-way II

DTW101

Tam Valley -
Dual 3-way II

Features

Control two servos independently with 3 positions each
Speed Controllable from very slow to very fast
Drive circuitry for external LED indicators - common anode OR common cathode
... more ...

more info on Dual 3-way II...
Only 1 remaining in stock

Our Price
£25.00


Fascia Controller Mount

MFC001

Tam Valley -
Fascia Controller Mount

Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your fascia controllers. Simply use a 1-3/8" hole saw to place on your fascia.

more info on Fascia Controller Mount...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.55


Servo Centering Tool

SRC001

Tam Valley -
Servo Centering Tool

Use this handy portable tool to keep your servos centered while you mount them under the layout. The tool consists of a battery box connected to a small circuit board that continuously puts out a centering signal for the servo (1.5 ms pulse). Keeping... more ...

more info on Servo Centering Tool...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£8.50


Miniature 9g Servo

SRV002

Tam Valley -
Miniature 9g Servo

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.20


12" Servo Cable

SRX112

Tam Valley -
12" Servo Cable

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£1.60


40" Servo Cable

SRX140

Tam Valley -
40" Servo Cable

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.70


Y Servo Cable

SRX003

Tam Valley -
Y Servo Cable

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.70


Toggle Switch Mount

RTM001

Tam Valley -
Toggle Switch Mount

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.20


No-Buzz InLine Servo Quieter

NBZ001

Tam Valley -
No-Buzz InLine Servo Quieter

Sometimes a servo will buzz or chatter continuously. Some poeple find this very annoying. The No-Buzz goes in line with the servo cord and quiets the servo.

more info on No-Buzz InLine Servo Quieter...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.00


SwitchWright Servo Bracket Kit

WPK001

Tam Valley -
SwitchWright Servo Bracket Kit

Kit version of the SwitchWright Servo Bracket Kit,

more info on SwitchWright Servo Bracket Kit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£3.90


SwitchWright Circuit Board

srw007

Tam Valley -
SwitchWright Circuit Board

Just the bare board for making up your own machines. The board includes the servo drive circuitry but leaves off the DCC decoder and the relay. To make a complete turnout installation you will need: a servo and some sort of mount; a fascia controller or... more ...

more info on SwitchWright Circuit Board...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£10.00


Crossover FC Mount Kit

XCM001

Tam Valley -
Crossover FC Mount Kit

Crossover Fascia Controller Mount

Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your crossover fascia controllers. They are the same as the above fascia mount except they have a different hole pattern and... more ...

more info on Crossover FC Mount Kit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.95


Decoder Tester

1595

TCS -
Decoder Tester

This premium decoder tester provides an easy way to test and program your decoder prior to installation.Included on this tester are 8x LED's for testing light functions, our top-of-the-line Station OFF Box or 2 light configuration kit, and an industry leading, 5-pole, Kato motor.

more info on Decoder Tester...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£100.00


DT Aux

1596

TCS -
DT Aux

This auxiliary decoder tester board adds additional connectors to your TCS Decoder Tester. Simply plug the head pins from the DT-AUX into the screw terminals on the decoder tester and you are ready to use the additional connectors

more info on DT Aux...
Only 1 remaining in stock

Our Price
£50.00


Track Tester

TT1

Train Tech -
Track Tester


Quickly tests track for power faults
Low cost and easy to use
Works on N, OO or HO track
Indicates DCC, DC polarity or fault
Small enough to check point frogs

TT1 Track Tester - With instructions and ready to use

more info on Track Tester...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.00


Level crossing barrier light effects

LFX1

Train Tech -
Level crossing barrier light effects

Controls the Amber, then flashing alternate Red lighting of a level crossing with 12 LED's.
These Lighting effects modules offer easy ways to add interesting lighting effects to your layouts and can all controlled by a standard 12V DC supply or DCC... more ...

more info on Level crossing barrier light effects...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£15.00


Traffic Lights

LFX3

Train Tech -
Traffic Lights

Controls one set of traffic lights

more info on Traffic Lights...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£15.00


Cover for PC1

PC1c

Train Tech -
Cover for PC1

This item appears to not currently be in stock

Our Price
£1.20


Submin LED pack for Level Crossing Barriers

LED1

Train Tech -
Submin LED pack for Level Crossing Barriers

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£4.00


Flashing light effects

LFX7

Train Tech -
Flashing light effects

Simulates four flashing effects used on a layout and is supplied with four suitable LED's

Examples include Belisha beacons, emergency services, camera flashes, lightning, sparks, arching etc.

These Lighting effects modules offer easy ways... more ...

more info on Flashing light effects...
Only 1 remaining in stock

Our Price
£15.00


Level Crossing + Sound

LFX1S

Train Tech -
Level Crossing + Sound

Same lighting sequence as the LFX1 plus realistic warning warble which sounds automatically as the lights start

more info on Level Crossing + Sound...
Only 1 remaining in stock

Our Price
£20.00


Steam Loco Sound

SFX10

Train Tech -
Steam Loco Sound

Steam locomotive - including fireman coaling, gear & whistle

• Easy to fit in seconds - no wiring or switches!

• No pickups or wires - works on regular DC & DCC

• Self contained capsule - built-in speaker & battery

• Tiny - smaller... more ...

more info on Steam Loco Sound...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£45.00


Diesel Loco Sound Capsule

SFX20+

Train Tech -
Diesel Loco Sound Capsule

Diesel locomotive - including turbo whine, air, horn etc

• Easy to fit in seconds - no wiring or switches!

• No pickups or wires - works on regular DC & DCC

• Self contained capsule - built-in speaker & battery

• Tiny - smaller than a... more ...

more info on Diesel Loco Sound Capsule...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£45.00


Track Sensor

ST1

Train Tech -
Track Sensor

The Track sensor is similar to a Sensor Signal except that it has no signal head. It plugs into the track in the same way, works on both DCC and DC layouts and has the same sockets to connect it to other Layout Link products.

You can use a Track... more ...

more info on Track Sensor...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£20.00


Mimic Light with plug in LEDs

ML1

Train Tech -
Mimic Light with plug in LEDs

Mimic Lights are very similar to Mimic Switches except they have no switch and only show the status or position of Layout Link accessories. Mimic Lights also have DCC decoders built in and can be set to display the status of any type of DCC... more ...

more info on Mimic Light with plug in LEDs...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£12.00


Mimic with Toggle Switch

MS1

Train Tech -
Mimic with Toggle Switch

Mimic switches feature a switch, 2 LED sockets and a Layout Link connector.

You can use a Mimic Switch to:

• Manually control a point on the PC200; LEDs mimic the point position

• Manually override an Sensor Signal; LEDs mimic the Signal... more ...

more info on Mimic with Toggle Switch...
Only 1 remaining in stock

Our Price
£14.00


Mimic with Push Switch

MS2

Train Tech -
Mimic with Push Switch

Mimic switches feature a switch, 2 LED sockets and a Layout Link connector.

You can use a Mimic Switch to:

• Manually control a point on the PC200; LEDs mimic the point position

• Manually override an Sensor Signal; LEDs mimic the Signal... more ...

more info on Mimic with Push Switch...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£14.00


Sound-Director

38000

Uhlenbrock -
Sound-Director

The Sound-Director is like an MP3-Player setup to play MP3 files (Samples) successively. It serves to produce original appropriate background noise in the model railway. It differentiates between continuous loops, time-controlled sounds, random sounds... more ...

more info on Sound-Director...
Only 1 remaining in stock

Our Price
£108.18


XPressNet to LocoNet

63840

Uhlenbrock -
XPressNet to LocoNet

The Mouse adaptor provides the interface between LokMaus and LocoNet making it possible to use Roco's LokMaus 2 or MultiMaus with Intellibox or Twin Center. The Adaptor has Three input sockets for the multiMaus and two LocoNet connections. Power is... more ...

more info on XPressNet to LocoNet...
This item appears to not currently be in stock

Our Price
£64.00


LocoNet Distribution Panel

62260

Uhlenbrock -
LocoNet Distribution Panel

The locoNet distribution panel may be fitted under a layout or mounted into the layout frame, with the enclosed front panel. The unit also has an inbuilt load indicator.

more info on LocoNet Distribution Panel...
Only 1 remaining in stock

Our Price
£16.80


Energy Store 10,000uf

ELKSOGR-10,000

Zimo -
Energy Store 10,000uf

10,000uf 16v electrolytic capacitor
For large scale decoders MX695, MX696

more info on Energy Store 10,000uf...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.10


Energy Store 22,000uf

ELKSOGR-22,000

Zimo -
Energy Store 22,000uf

22,000uf 16v electrolytic capacitor
For large scale decoders MX695, MX696

more info on Energy Store 22,000uf...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£2.50


Energy Store Module Long

GOLMLANG

Zimo -
Energy Store Module Long

7x Gold Caps in Series 140,000uf, for large scale decoders MX695, MX696

more info on Energy Store Module Long...
Only 1 remaining in stock

Our Price
£23.00


Energy Store Module Round

GOLMRUN

Zimo -
Energy Store Module Round

7x Gold Caps in Series 140,000uf, for large scale decoders MX695, MX696

more info on Energy Store Module Round...
Only 1 remaining in stock

Our Price
£23.00


2.5v Gold Cap

GOLDSORG

Zimo -
2.5v Gold Cap

1 Farad 2.5Volt 'Gold Cap'
For large scale decoders MX695, MX696

more info on 2.5v Gold Cap...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£1.80


Smoke Generator

TR92-101

Zimo -
Smoke Generator

The large train smoke generator is equipped with 4 terminals

Fan Voltage: max 6 Volt
Heating Element Voltage: max 12 Volts
(Configurable via CV # 137, 138, 139)

L = 49 mm (w/o metal flange)
B = 29 mm (w.o flange)
H = 33... more ...

more info on Smoke Generator...
Only 1 remaining in stock

Our Price
£62.40


Energy Store Kit

ELKSODR

Zimo -
Energy Store Kit

A collection of components, to build an energy storage module for Zimo decoders that do not have this built in such as MX621, MX630, MX648, MX646

Choke 100 uH,
diode 1N4007,
resistors... more ...

more info on Energy Store Kit...
This item is in Stock 2-4 Working Days Delivery Available

Our Price
£5.50



MXTAPS

Zimo -

This item is in Stock 2-4 Working Days Delivery Available

Our Price
£50.00



MXTAPV

Zimo -

Only 1 remaining in stock

Our Price
£65.00


lenzdigitraxesusprog expressncetcsbachrusdcc specialtiesteam digitalctzimo
Coastal DCC Ltd
Registered Offices: 71 Alan Road, Ipswich IP3 8EY
Registration Number: 9447637 in England & Wales
Terms & Conditions | Privacy | Contact Us | Delivery Policy | Return Policy