Acculites
Feedback
Feedback components allow you to help determine which sections of track are occupied/unoccupied, these can also allow for manual push button control back into computer system.
BDL-BO-SZ
BDL168 Break Out Board Single Zone
Break out board for the BDL168 to replace the 44 way connector that brings all the pins to screw terminals rather than solder tabs.
This version has a single input for all four zones.
more info on BDL168 Break Out Board Single Zone...This item appears to not currently be in stock
But is still available to order
£33.00
Wiring Harness
Lighting Board for Bulbs
This is a one point connection for all your bulbs within your locomotive. Simply wire your decoder to the board and the on board resistors take care of the drop down for you,then wire your bulbs back to the board.
This kit contains NO BULBS
more info on Lighting Board for Bulbs...This item is in Stock and available for dispatch
£5.20
5002
Super DCC LED Lighting Board
The ACCU-LITES Super DCC LED Lighting board, is a one point connection for all your LED's within your locomotive. You simply wiring your decoder wires to the board and the on board resistors take care of the drop down for you and all you have to do is... more ...
more info on Super DCC LED Lighting Board...This item is in Stock and available for dispatch
£7.00
5006
Super DCC Lighting Board for 0603 LEDs
The ACCU-LITES Super DCC LED Lighting board, is a one point connection for all your LED's within your locomotive. You simply wiring your decoder wires to the board and the on board resistors take care of the drop down for you and all you have to do is... more ...
more info on Super DCC Lighting Board for 0603 LEDs...This item is in Stock and available for dispatch
£5.75
Point Motors
Tortoise Connector - Updated
This fit the updated tortoise motors produced from around the middle of 2020 with a connector width of 35.5mm.
more info on Tortoise Connector - Updated...This item is in Stock and available for dispatch
£3.70
Tortoise Snaps II
This fit the updated tortoise motors produced from around the middle of 2020 with a connector width of 35.5mm.
SNAPS! Is a EZ wiring connector for the Tortoise Slow Motion Switch Machine. It is composed of a connector that SNAPS onto the... more ...
SNAPS
Tortoise Snaps
These fit the original tortoise motors produced up to around 2020, which have a connector width of approximately 32.5mm.
SNAPS! Is a EZ wiring connector for the Tortoise Slow Motion Switch Machine. It is composed of a connector that SNAPS onto the... more ...
TortConn
Tortoise Connector
These fit the original tortoise motors produced up to around 2020, which have a connector width of approximately 32.5mm.
Please note these are not suitable for the Smail or motors produced after 2020, use the updated version for these Tortoise Connector - Updated
more info on Tortoise Connector...This item is in Stock and available for dispatch
£3.70
Page (2) of (2)