DCC Concepts - High Quality Power Bus Strippers
High Quality Power Bus Strippers.
DCCconcepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can also do it with NO need for cuts and breaks in it at all with this... more ...
more info on High Quality Power Bus Strippers...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£23.36
DCT-FSC
DCC Concepts - Fine Sprue Cutter
Only 1 remaining in stock
Our Price
£10.76
DCC Concepts - Fine Wire Strippers (Pre-Settable)
Fine Wire Strippers (Pre-Settable)
Exclusive to DCCconcepts! A second stripping groove and a razor sharp cutting edge between them for neat clean wire trimming ! These are the best there are, anywhere and the ultimate stripper for fine work. The... more ...
more info on Fine Wire Strippers (Pre-Settable)...Only 1 remaining in stock
Our Price
£15.26
DCT-SND.12
DCC Concepts - Screw and Nut Driver Set
This item is in Stock 2-4 Working Days Delivery Available
T.B.C
DCT-SSS
DCC Concepts - Super Sharp Shears
Only 1 remaining in stock
Our Price
£12.56
DCS-AT50
DCC Concepts - 50 Watt Soldering Iron
Only 1 remaining in stock
Our Price
£35.96
DCF-BR2
DCC Concepts - Bearing Reamers
These little tools will make a big difference to how many coaches or wagons your loco can pull. – They smooth the (usually) imperfect coning of the axle bearings in trucks/bogies greatly lowering friction. Two types, one with centre roller for standard... more ...
more info on Bearing Reamers...Only 1 remaining in stock
Our Price
£11.66
DCC Concepts - Baseboard Dowels
4 pairs of precision baseboard alignment dowels. These are the BEST alignment dowels ever offered. Easier to install accurately than any other… All that is needed is a pilot drill and a 13mm and 19mm spade bit. Hard alloy, heavily passivated for zero... more ...
more info on Baseboard Dowels...Only 1 remaining in stock
Our Price
£14.36
DCC Concepts - Baseboard Dowel (w/Spade Drill Bits)
2 pairs of precision baseboard alignment dowels PLUS a pilot drill and a 13mm and 19mm spade bit needed for their installation. These are the BEST alignment dowels ever offered. Easier to install accurately than any other… Hard alloy, heavily... more ...
more info on Baseboard Dowel (w/Spade Drill Bits)...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£14.36
DCC Concepts - Mega Screw Set
Mega Screw Set 10x 60 Vials (w/20 Drill Bit Set)
Mega set of 10 vials each containing 60+ panhead or countersunk screws, 120x 2x8mm, 120x 2x5mm, 60x 1.5x8mm(ph), 60x 1.5x6mm(ph), 60x 1.5x4mm(ph), 120x 1.0x5mm and 60x 1.0x3mm(cs). Set also comes with a... more ...
more info on Mega Screw Set...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£26.96
DCC Concepts - Stainless Steel Scale Ruler and Handrail Jig
The DCG-SR4 is a new and innovative tool from DCCconcepts. A top quality, truly comprehensive scale rule and an accurate handrail bending jig.
The very fine laser-cut holes are 0.3mm or a little under 1 scale inch in diameter, and the increments from... more ...
more info on Stainless Steel Scale Ruler and Handrail Jig...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£13.46
DCG-BBEM
DCC Concepts - Back-to-Back EM/18.2
Only 1 remaining in stock
£12.76
DCG-BB145
DCC Concepts - Back-to-Back (OO/HO)
This item is in Stock 2-4 Working Days Delivery Available
£8.96
DCG-BBN
DCC Concepts - Back-to-Back (N)
This item is in Stock 2-4 Working Days Delivery Available
£9.00
DCT-XTC
DCC Concepts - Track Cutter
Only 1 remaining in stock
Our Price
£11.66
DCT-HTC
DCC Concepts - Heavy Track Cutter
Only 1 remaining in stock
Our Price
£14.36
RJ12Crimp
General Electronics - Crimp Tool
Crimp tool suitable for crimping RJ12 Connectors as used with Digitrax Loconet Cables
more info on Crimp Tool...This item appears to not currently be in stock
£20.00
TT1
Train Tech - Track Tester
Quickly tests track for power faults
Low cost and easy to use
Works on N, OO or HO track
Indicates DCC, DC polarity or fault
Small enough to check point frogs
TT1 Track Tester - With instructions and ready to use
more info on Track Tester...This item appears to not currently be in stock
£4.50
DR1
Train Tech - Drill 1
Pack of 5 miniature twist drill bits
1x 0.8mm
2x 1.0mm
1x 1.2mm
1x 1.8mm
more info on Drill 1...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£3.55
BAT1
Train Tech - 3x CR2032 Batteries
For use with AL Tail / Coach Light Sets
more info on 3x CR2032 Batteries...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£2.70
TT10+
Train Tech - Multi Gauge Track Tester
Quickly tests track for power faults
Low cost and easy to use
Works on OO/HO , O gauge & G Gauge track and intervening gauges
Indicates DCC, DC polarity or fault
Checks point frogs
Multicolour LED... more ...
more info on Multi Gauge Track Tester...This item is in Stock 2-4 Working Days Delivery Available
Our Price
£9.00