Acculites - PM42 Break Out Board
Break out board for the PM42 to replace the 44 way connector that brings all the pins to screw terminals rather than solder tabs.
more info on PM42 Break Out Board...This item is in Stock 2-4 Working Days Delivery Available
£30.00

jumper
Acculites - PM42 Breakout board jumpers
A pair of Jumpers to enable outputs on the PM42 Break Out Board to be paired for autoreverse sections.
more info on PM42 Breakout board jumpers...This item is in Stock 2-4 Working Days Delivery Available
£0.75
DCC Concepts - Power Bus Suppressors & Terminators (2)
Two pack of BT2. When any short circuit happens on your DCC powered model railway, there is a rapid collapse of track voltage followed by a voltage spike that is approximately 3 times the original rail voltage... On a larger scale layout or one with some... more ...
more info on Power Bus Suppressors & Terminators (2)...This item is in Stock 2-4 Working Days Delivery Available
£5.70

dspogcb
DCC Specialties - On-Guard Circuit Breaker
Short Circuit protector for a single block, fixed at 4amp cut out.
more info on On-Guard Circuit Breaker...This item is in Stock 2-4 Working Days Delivery Available
£21.50

psx1
DCC Specialties - PowerShield X 1 Block
Intelligent, DCC, Solid State Circuit Breakers with Integrated Block Detection and Feed Back
The Power Shield X series is a product of years of research into problems
dealing with false overload that cause premature shut down of DCC Boosters
and... more ...
more info on PowerShield X 1 Block...Only 1 remaining in stock
£38.00

dsppsx2
DCC Specialties - PowerShield X 2 Block
Intelligent, DCC, Solid State Circuit Breakers with Integrated Block Detection and Feed Back
The Power Shield X series is a product of years of research into problems
dealing with false overload that cause premature shut down of DCC... more ...
more info on PowerShield X 2 Block...This item is in Stock 2-4 Working Days Delivery Available
£75.00
DCC Specialties - PowerShield X 3 Block
Intelligent, DCC, Solid State Circuit Breakers with Integrated Block Detection and Feed Back
The Power Shield X series is a product of years of research into problems
dealing with false overload that cause premature shut down of DCC Boosters
and... more ...
more info on PowerShield X 3 Block...This item is in Stock 2-4 Working Days Delivery Available
£110.00
DCC Specialties - PowerShield X 4 Block
Intelligent, DCC, Solid State Circuit Breakers with Integrated Block Detection and Feed Back
The Power Shield X series is a product of years of research into problems
dealing with false overload that cause premature shut down of DCC Boosters
and... more ...
more info on PowerShield X 4 Block...Only 1 remaining in stock
£145.00

dsprrampv1a
DCC Specialties - RampMeter,Ver I
Version 1 without enclosure
Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound unit
more info on RampMeter,Ver I...This item appears to not currently be in stock
£60.00

dsprrampv2a
DCC Specialties - RampMeter,Ver II, w/enc,
Version 2 with enclosure and clip leads
Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound unit
more info on RampMeter,Ver II, w/enc,...This item appears to not currently be in stock
This item is on back order with our suppliers
£85.00

dsprrampv3a
DCC Specialties - RampMeter,Ver III w/enc/Batt
Version 3 with enclosure, clip leads and Battery Back up for measurements below 7 volts
Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound unit
more info on RampMeter,Ver III w/enc/Batt...This item is not kept in stock, but is ordered in
£97.00

dsprrampv4
DCC Specialties - Rampmeter, Ver IV High Power
Version 4 with enclosure, clip leads and Battery Back, designed for large scale high voltage and currents
Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound unit
more info on Rampmeter, Ver IV High Power...Only 1 remaining in stock
£86.00

compsonalert
DCC Specialties - Sonalert for PSX Circuit Breakers
This item is in Stock 2-4 Working Days Delivery Available
£6.50

Cutout
DCC4PC - Rail Com Cut Out device
Produces a fully spec compliant DCC cutout so as to allow non-RailCom-enabled hardware to function in a RailCom-enabled environment.
If your system already produces a cutout, but you have equipment such as point accessory decoders or turntable... more ...
more info on Rail Com Cut Out device...This item appears to not currently be in stock
£60.00
Digitrax - Power Management System
Get the benefits of short circuit management and auto reversing without adding more boosters!
PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts.
more info on Power Management System...This item appears to not currently be in stock
This item is on back order with our suppliers
£65.00
NCE - CP-6 Circuit Protector 6 Block
Circuit protection for up to 6 sections of your railroad. Operates with ANY DCC system. Factory set to 1 Amp per section. Sections can be connected together for more power per section. See optional lamp packs below for 1.75 Amps per section.
PowerCab
more info on CP-6 Circuit Protector 6 Block...This item is in Stock 2-4 Working Days Delivery Available
£26.00
NCE - EB-1 Electronic Breaker
The EB1 Circuit breaker provides short circuit protection for one power district. Can be used with most DCC systems. Threshold, Duration, type of reset can all be configured. Features of the EB1:
Provides short circuit protection for one power... more ...
more info on EB-1 Electronic Breaker...This item appears to not currently be in stock
This item is on back order with our suppliers
£24.12

TRN001
Tam Valley - TurnOn add-on for booster,
Soft start for DCC to prevent "short" due to current hungry sound decoders and keep-alive circuits.
more info on TurnOn add-on for booster,...This item is in Stock 2-4 Working Days Delivery Available
£17.59

CFJ003
Tam Valley - Circuit Breaker
This is the same board as the Dual Frog Juicer but confugured to work as a circuit breaker. When there is a short it will cut off both rails at once. This solves some problems where only one rail is cut off and wheels bridge to another active rail. ... more ...
more info on Circuit Breaker...This item is in Stock 2-4 Working Days Delivery Available
£30.00

DCCBreak
Team Digital - DCC Circuit Breaker
The purpose of a circuit breaker is to keep a booster from shutting down because of a current overload or short and thus shutting down the whole section of the layout the booster is powering. Normally there would be at least two circuit breakers for each... more ...
more info on DCC Circuit Breaker...This item is in Stock 2-4 Working Days Delivery Available
£27.00