01473 710946
Your Basket is empty
Coastal DCC Logo
Coastal DCC for Modellers by Modellers
Home » Products » DCC Concepts » Tools » Soldering Irons & Solder » Sapphire 100 Whitemetal LMP Solder
Sapphire 100 Whitemetal LMP Solder

DCS-S100

DCC Concepts -
Sapphire 100 Whitemetal LMP Solder

This item is in Stock and available for dispatch
RRP £12.95
Our Price
£11.00


Sapphire 100 (Low Temp Solder)

Sapphire 100 is an exciting solder which is designed for use on white-metal and similar alloys. We worked hard to make sure that its composition coexists better with brass than conventional 70 degree low melt solders, so while tinning is still recommended for larger joints this solder will work without pre-tinning so it is not always essential for smaller parts.

Its low temperature gives the ability to solder quickly and well without heating up the white-metal too much. It reacts differently and it can be re-worked… Because unlike 70 degree solder it will not combine with the white-metal and produce a weak ‘sludge’, so joints end up stronger.

Clean the white metal properly and use a good flux and you will also find it has much better flow and needs less per joint than conventional WM solder! We hope you like the way we present it – we often
Sapphire 100 (Low Temp Solder)

Sapphire 100 is an exciting solder which is designed for use on white-metal and similar alloys. We worked hard to make sure that its composition coexists better with brass than conventional 70 degree low melt solders, so while tinning is still recommended for larger joints this solder will work without pre-tinning so it is not always essential for smaller parts.

Its low temperature gives the ability to solder quickly and well without heating up the white-metal too much. It reacts differently and it can be re-worked… Because unlike 70 degree solder it will not combine with the white-metal and produce a weak ‘sludge’, so joints end up stronger.

Clean the white metal properly and use a good flux and you will also find it has much better flow and needs less per joint than conventional WM solder! We hope you like the way we present it – we often find that with bar solders even we cannot tell which one is which, so we cast it into a shape that makes it impossible to forget.

Use DCCconcepts Sapphire flux with this solder for excellent results!

Manufacturer : DCC Concepts
SKU : DCS-S100
EAN : 9347394014963
Coastal DCC Ltd
Registered Offices: Ipswich Model Railway Centre, 48-52 Tomline Road, Ipswich, IP3 8DB
Registration Number: 9447637 in England & Wales
Terms & Conditions | Privacy | Contact Us | Delivery Policy | Return Policy