DCC Specialties - Jack Wabbit Quad Snap LoconetThis item is in Stock and available for dispatch
The Jack Wabbit™ is a Quad version of DCC Specialties popular Hare and Wabbit Intelligent Accessory Decoders. This decoder has four fully functional intelligent decoders on one printed circuit board. The four decoders operate independently and each one has all of the advanced features and much more, compared to our popular Hare and Wabbits. The Jack Wabbit is compatible with all types of turn-out motors, including stall motors, snap coils, servos and all others!
Jack Wabbit Quad: 4 Outputs in one Stationary Decoder
- Auto Throw™
Automatically throws points when a train is approaching against the points!
- Auto Throw™ Timer
Provides for timing the auto throw function to prevent two trains from colliding.
- Auto Return™
Automatically returns the points after a preset interval for any/all operational events.
Sets up to 13 routes by simple address programming in addition to the primary address.
Allows the Dispatcher to lock out any or all other switch commands.
Overrides the Jack WABBITS operation if a designated block is occupied.
Provides for only one route direction response for a Throw or Clear command.
Programmed power up response to either power off position, throw, or clear.
Allows button or toggle switch manual control of the points.
CV 63=42, Sets Any or All Addresses and CVs to original factory default values.
Jumper selection resets entire Jack Wabbit to factory default Address and CV’s.
The JACK WABBIT will operate on DC using the Manual Push Button Control Option.
Uses a stall motor and Auto Throw for triggered control of a semaphore or crossing.
Using Auto Throw feature.
Digitrax (LocoNet), Lenz (ExpressNet) and NCE (Cab Bus)
Loconet - Compatible
SKU : jacksnaploco