Digitrax - Accessory Decoders
SEC8-BO
Acculites - SE8c Break Out Board
Break out board for the SE8C to replace the 44 way connector that brings all the pins to screw terminals rather than solder tabs.
more info on SE8c Break Out Board...Only 1 remaining in stock
£34.34
DSXC4
DS74 Input Connector Board
Input interconnect board for DS74.
Provides plug and play connectivity for DS74 inputs.
Supplied with ribbon cable to plug into DS74 10 pin Input header.
Allows plug-in of up to 4... more ...
more info on DS74 Input Connector Board...This item is in Stock and available for dispatch
£13.50
DSXCP1
Switch Control Panel
Fascia mount Switch control device.
Wire to DS74 input cable, or use DSXC4 for plug and play.
Two color leds display current Switch state.
Supplied with 3 wire control cable.
more info on Switch Control Panel...This item is in Stock and available for dispatch
£12.70
Servo
Accessory Decoders that are capable of controlling Servos
DS78V
Stationary Servo Decoder
Eight 9G servo decoder for 2-position Slow-motion turnouts.
Configurable to control eight 3-position semaphores.
Works with compatible LocoNet Systems.
Plug and play connections.
Option... more ...
more info on Stationary Servo Decoder...This item is in Stock and available for dispatch
£72.00
Signal Control
Accessory Decoders that are capable of controlling Signals and Lights
SE74
Signal Decoder
Fully connectorized installation.
Optional support for DCC 9-Aspect control mode, including Lunars.
Easy setup with Option Switches and LocoNet programming.
Configurable for four solenoid or four... more ...
more info on Signal Decoder...This item is in Stock and available for dispatch
£99.00
Single Coil Solenoid
Point Decoders that are capable of controlling Single-Coil Solenoid also known as Bi-Polar point motors such as Kato or AristoCraft. Some of these decoders may require a 3 to 2 wire adapter.
DS51K1
STATIONARY DECODER FOR KATO UNITRACK
Stationary Decoder for a single Kato unitrack turnout.
Compatible with
N Scale - Powered
#6 R/H 20-202
#6 L/H 20-203
#4 R/H 20-220
#4 L/H 20-221
HO Scale - Powered
#6 R/H... more ...
more info on STATIONARY DECODER FOR KATO UNITRACK...This item appears to not currently be in stock
But is still available to order
£15.60
Slow-Motion
Point Decoders that are capable of controlling Slow-Motion point motors such as Tortoise or Cobolts
DS44
DS44 STATIONARY DECODER 4 SLO-MO SWITCH MACHINES
No frills stationary decoder.
Control 4 slow motion turnout machines from your DCC throttle.
Quick set up for sequential addresses or Independent address
more info on DS44 STATIONARY DECODER 4 SLO-MO SWITCH MACHINES...Only 1 remaining in stock
£36.20
DS52
Stationary Decoder
Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines
Simple hook up and set up.
Control 2 individual turnout machines.
2 Slow motion turnout machines, such as Tortoise™ by Circuitron or... more ...
more info on Stationary Decoder...This item is in Stock and available for dispatch
£23.50
DS74
DS74 Quad Switch Stationary Decoder
## These are not suitable for Peco/Peco Solenoid point motors ##
Quad switch decoder for Solenoid or Slow-motion turnouts.
Configurable for Capacitive Discharge with balky solenoids.
Configurable for on/off... more ...
more info on DS74 Quad Switch Stationary Decoder...This item is in Stock and available for dispatch
£64.50