NCE - HO/OO Gauge
D14SR
This HO sized decoder is designed for the Kato RS2/RSC2 and C44-9, Stewart VO-1000, Intermountain F7, Atlas U23B and U30B locomotives in HO Scale. The easiest installation possible, just plug it in. 1.3 Amp rating (2 Amp peak). Six function outputs
Current Rating - Avg 1.3 Amps , Peak 2 Amps
Connector - NEM 652 (Direct Plug)
Size - 21 x 16 x 4 (mm)
Functions - 6
more info on D14SR...This item is in Stock and available for dispatch
£38.75
DA-SR
HO Board replacement decoder suitable for
HO Scale
Atlas GP38, GP40, RS1/2/3, C424/5, GP7, RSD4/5/12, C30-7, U23B, U33/36C
Athearn "Genesis" series locomotives; F7, F3, SD70, SD75, SD80, etc
Kato GP35, SD40, C44-9W
Stewart AS16, F3A, F3B, F7A,... more ...
more info on DA-SR...This item is in Stock and available for dispatch
£26.50
DA-Pack
Pack of 4 DA-SR
HO Board replacement decoder suitable for
HO Scale
Atlas GP38, GP40, RS1/2/3, C424/5, GP7, RSD4/5/12, C30-7, U23B, U33/36C
Athearn "Genesis" series locomotives; F7, F3, SD70, SD75, SD80, etc
Kato GP35, SD40,... more ...
more info on DA-Pack...Only 1 remaining in stock
£88.00
P2K-SR
This HO sized decoder designed for the LifeLike Proto 2000 GP7/9/30 and SD60 locomotives in HO Scale. The easiest installation possible, just plug it in! Note: follow LifeLike’s directions about using the correct light bulbs for DCC. 1.3 Amp (2 Amp... more ...
Current Rating - Avg 1.3 Amps , Peak 2 Amps
Connector - NEM 652 (Direct Plug)
Size - 35.5 x 15.24 x (mm)
Functions - 4
more info on P2K-SR...Only 1 remaining in stock
£38.75
SW9-SR
This decoder is made to fit the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board in the locomotive. No need to remove the weight. The decoder provides a means to install a white LED or 12 Volt bulb as... more ...
more info on SW9-SR...This item is in Stock and available for dispatch
£32.90
NMP15 Drop in decoder for Atlas N-scale MP15
Torque Compensation for ultra smooth low speed performance
Programmable Start, Mid and Maximum speed works for all speed modes
Motor rating 1 Amp continuous, 1.25 Amp peak (stall)
Both function outputs have lighting effects generators
Select from 15... more ...
more info on NMP15 Drop in decoder for Atlas N-scale MP15...This item is in Stock and available for dispatch
£35.00
Bach-Dsl
This decoder is specifically designed as a replacement for Bachmann "DCC Equipped" diesels. Providing a smooth, quiet operation.The decoder has 4 function outputs. Complete with 2 Golden Glow LEDs in the package
more info on Bach-Dsl...This item is in Stock and available for dispatch
£21.00
D13NHJ
Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC “Quick Plug” with small no halt module installed. Caution: Not for use with more than 15 Volts track voltage
more info on D13NHJ...This item is in Stock and available for dispatch
£48.00
D13NHP
Direct plug in to locos equipped with NMRA 8 pin plug
Features of this decoder:
NCE No-Halt_Insurance technology, keeps locos moving over dirty track
Supplied as two pre-wired modules for easier, more flexible... more ...
Current Rating - Avg 1.3 Amps , Peak 2 Amps
Connector - NEM 652 (Wires)
Functions - 4
KeepAlive/Standby (Available) - Yes
more info on D13NHP...This item is in Stock and available for dispatch
£53.35
D16MTC
8 function decoder with 21 pin 'MTC' plug.
Dimensions: 0.900 x 0.615 x .180 inches – 23 x 16 x 4.7 mm
Direct plug in to locos equipped with NMRA 21 pin MTC (NEM651) plug
Features of this decoder::
Silent RunningTM,torque compensated motor... more ...
Current Rating - Avg 0.75 Amps , Peak 1.2 Amps
Connector - 21 Pin
Size - 23 x 16 x 4.7 (mm)
BEMF - Yes
more info on D16MTC...This item is in Stock and available for dispatch
£32.30
Page (1) of (2)