01473 710946
Your Basket is empty
Coastal DCC Logo
Coastal DCC for Modellers by Modellers
Home » Products » NCE » Feedback » BD20 Block Detector
BD20 Block Detector

524-205

NCE -
BD20 Block Detector

This item appears to not currently be in stock
This item is on back order with our suppliers
Our Price
£15.74


Detects DCC current being drawn in a block. Connects to AIU01 or Mini Panel
Isolated so that there is no electrical connection to the track Needs no external power for most operations Suitable for DCC power up to 20 Amps Can light up LED or operate relay with external DC power (5-12 Volts)

The NCE BD20 uses a current sensing coil to detect power being draw in a section of track. Rahter than other methods of detection like the Digitrax BDL168 or Lenz LB101 there is no loss of voltage through the detection circuit.

The BD20 can be be placed locally to the section of track being detected with a small gauge wire being run back to the feedback unit, like the NCE AIU or Mini Panel.

In addition to providing occupancy to a feedback unit the BD20 can be used as a standalone unit or with other manufacturers equipment. If the BD20 is powered from a 5~12v DC , it
Detects DCC current being drawn in a block. Connects to AIU01 or Mini Panel
Isolated so that there is no electrical connection to the track Needs no external power for most operations Suitable for DCC power up to 20 Amps Can light up LED or operate relay with external DC power (5-12 Volts)

The NCE BD20 uses a current sensing coil to detect power being draw in a section of track. Rahter than other methods of detection like the Digitrax BDL168 or Lenz LB101 there is no loss of voltage through the detection circuit.

The BD20 can be be placed locally to the section of track being detected with a small gauge wire being run back to the feedback unit, like the NCE AIU or Mini Panel.

In addition to providing occupancy to a feedback unit the BD20 can be used as a standalone unit or with other manufacturers equipment. If the BD20 is powered from a 5~12v DC , it can then be used to drive a LED or relay, which then allows you to multiple things, like switch in or out an ABC unit, illuminate an indicator on a board for hidden sidings, or triggering a signal to be set to Danger.

### These have been difficult to get hold of an alternative is the DCC Concepts LM-ID units ###

Manufacturer : NCE
SKU : 524-205
EAN : 816757010632
Coastal DCC Ltd
Registered Offices: Ipswich Model Railway Centre, 48-52 Tomline Road, Ipswich, IP3 8DB
Registration Number: 9447637 in England & Wales
Terms & Conditions | Privacy | Contact Us | Delivery Policy | Return Policy