Zimo - Decoders
Sound Decoders
MS Mini Sound Decoder Next18G
This replaced the MX658N18 decoder, this is only offered with a Next18 plug.
MS-Sound with a fully digital sound amplifier of 3 W for 4~8 Ohm speakers.
G-variant with 2 ext. Goldcaps
DCC addresses 1 – 10239, consist addresses 1 – 9999,... more ...
Current Rating - Avg 0.8 Amps , Peak 1.5 Amps
Connector - Next18
Size - 25 x 10.5 x 4 (mm)
Functions - 4 (0.6Amps Total Max) + 2 Logic Functions
RailCom - Yes
Asymmetric DCC - Yes
BEMF - Yes
Sound - Yes
KeepAlive/Standby (Available) - Yes
more info on MS Mini Sound Decoder Next18G...This item is in Stock and available for dispatch
£115.00
MS Mini Sound Decoder Next18
This replaces the small MX659N18 decoder and is only offered with a Next18 plug.
The dimensions of this SOUND decoder are exactly the same as the NMRA and VHDM standards for NON-SOUND decoders with Next18 interface.
MS-Sound with 1W fully digital... more ...
Current Rating - Avg 0.7 Amps , Peak 1.5 Amps
Connector - Next18
Size - 15 x 9.5 x 3.3 (mm)
Functions - 6 (0.5Amps Total Max)
RailCom - Yes
Asymmetric DCC - Yes
BEMF - Yes
Sound - Yes
KeepAlive/Standby (Available) - Yes
more info on MS Mini Sound Decoder Next18...This item is in Stock and available for dispatch
£120.00
Function Only
Function only decoders do not provide any motor control, these are commonly used in 'dummy' or trailing cars where lighting functions need to be controlled. In some instances these can be piggybacked to provide additional lighting functions to an existing motor decoder.
mx671n
Mini Function Only Decoder
Current Rating - Avg 0.7 Amps
Connector - NEM 651
Size - 10.5 x 8 x 2.2 (mm)
Functions - 6
This item is in Stock and available for dispatch
£24.00
mx671r
Mini Function Only Decoder
Current Rating - Avg 0.7 Amps
Connector - NEM 652 (Wires)
Size - 10.5 x 8 x 2.2 (mm)
Functions - 6
This item is in Stock and available for dispatch
£26.00
MX685
Function Only Decoder
Function only decoder, a variation of the MX630
Also available with a Plux16 connector
Connector - Wires
Size - 20 x 11 x 3.5 (mm)
Functions - 8 (1Amps Total Max) + 2 Logic Functions
RailCom - Yes
more info on Function Only Decoder...This item is in Stock and available for dispatch
£23.00
Function Only Decoder
Function only decoder on a 21pin socket, a variation of the MX634.
This decoder can be switched between 'C' & 'D' mode by setting cv 8 =3 (Logic Level on Fo3 & 4) and cv8=4 (Full Power on Fo3 & 4)
Connector - 21 Pin
Size - 20.5 x 15.5 x 3.5 (mm)
Functions - 8 (1.2Amps Total Max) + 2 Logic Functions
RailCom - Yes
more info on Function Only Decoder...This item is in Stock and available for dispatch
£30.00
In some instances these can be piggybacked to provide additional lighting functions to an existing motor decoder.
Keep Alive Units
‘Stay-alive’ gold cap block
Module of Six 'mini goldcaps' in a block providing 50,000uF at 16V for decoders with unlimited direct energy storage connetions.
For use with Zimo MN330, MN340, MS440 & MS450 Type decoders.
Not for use with the older... more ...
Height - 11.14mm
Length - 14.6mm
Width - 8mm
more info on ‘Stay-alive’ gold cap block...This item is in Stock and available for dispatch
£10.00
MGOGURT
Miniature gold caps (0.3F)
Miniature gold caps (0.3F) for decoder MS580N18 as extension of the internal energy storage to 150,000 µF on 5 V basis, or for self-building of mini gold modules, or with StayAlive controllers, e.g. STACO1.
Mini gold cap 0,3 F/2,7 V,... more ...
more info on Miniature gold caps (0.3F)...This item is in Stock and available for dispatch
£22.00
Page (5) of (6)