Fascia Controler Mount Kit
3D Printed of precision PLA, a tough easily painted easily painted plastic with a rough texture. Simply use a 1-3/8" hole saw to place on your fascia. The four included screws hold it securely in place and the recess keeps the button safely out of the... more ...
more info on Fascia Controler Mount Kit...This item is in Stock and available for dispatch
DCC Accessory Booster Board
DCC Booster board without the power supply. These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply. A jumper is used to set either Accessory Mode or Power District Mode. Each board can supply up... more ...
more info on DCC Accessory Booster Board...This item is in Stock and available for dispatch
Point Decoders that are capable of controlling Slow-Motion point motors such as Tortoise or Cobolts
Turtle Stall Motor Decoder
The Turtle Stall Motor Driver - Run a Tortoise with a TVD Fascia Controller
Drives stall motors including Tortoise as well as SwitchMaster, MP1, MP5 Switch Motors, Cobalt and almost any other 6-12V geared motor.
Speed/Torque... more ...
more info on Turtle Stall Motor Decoder...This item is in Stock and available for dispatch
Deluxe Turtle Package
Deluxe package includes a Turtle, a Fascia Controller, and a SNAPS wiring connector that plugs directly in to the bottom of Tortoise switch machine. Also include two 12" jumper wires that plug in to the Turtle and the SNAPS. The Fascia Controller comes... more ...
Accessory Decoders that are capable of controlling Servos
Micro Singlet Board Only
The singlet has a baby brother, the Micro Singlet. It is a simple servo decoder designed to drive turnouts and only turnouts. It solves the problem of servo buzzing by turning the servo off at the end of the throw. Special circuitry and programming... more ...
more info on Micro Singlet Board Only...Only 1 remaining in stock
QuadLN Remote Aligner,
Used with the QuadLN for alignment of servos. Just one of these needed for all of your QuadLNs. Comes with a 10' cable which allows you to stand next to your turnout while aligning the servo
more info on QuadLN Remote Aligner,...Only 1 remaining in stock
SwitchWright Circuit Board, DCC & Relay
Just the bare board for making up your own machines. The board includes the servo drive circuitry with builtin DCC decoder and a DPDT relay. To make a complete turnout installation you will need: a servo and some sort of mount; a fascia controller or a... more ...
more info on SwitchWright Circuit Board, DCC & Relay...This item is in Stock and available for dispatch
SwitchWright Circuit Board
Just the bare board for making up your own machines. The board includes the servo drive circuitry but leaves off the DCC decoder and the relay. To make a complete turnout installation you will need: a servo and some sort of mount; a fascia controller or... more ...
more info on SwitchWright Circuit Board...This item is in Stock and available for dispatch
Accessory Decoders that are capable of controlling Signals and Lights
LEDecoder Lighting Decoder
This 3 ouput Accessory Decoder for LEDs has numerous uses. It uses 2 DCC addresses.
Can be used for DCC controlled
The flicker function imiitates arc welding, flickering lights and fires.
more info on LEDecoder Lighting Decoder...Only 1 remaining in stock
Fascia Mount Signlet Kit
Crossover Fascia Controller Mount
Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your crossover fascia controllers. They are the same as the above fascia mount except they have a different hole pattern and are... more ...
more info on Fascia Mount Signlet Kit...This item is in Stock and available for dispatch
Page (1) of (4)