Accessory Decoders
Servo
Accessory Decoders that are capable of controlling Servos
DRIVER
N3IX - QuadLN_S Stall Motor Driver Board
The QuadLN_S Stall Motor Driver Board add-on provides four 5 Volt outputs for driving Stall Motors, low current 5 Volt Relays and Servos. Includes four cables plus mounting screws and standoffs.
QuadLN_S Stall Motor Driver Board... more ...
more info on QuadLN_S Stall Motor Driver Board...This item is in Stock and available for dispatch
£10.00
FC_DIY
N3IX - DIY Fascia Controller w/solder pads
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles up to two bi-color LEDs in common anode, common cathode or 2-lead form factor, or up to four single color... more ...
more info on DIY Fascia Controller w/solder pads...This item is in Stock and available for dispatch
£4.20
FC_DIY_6
N3IX - Mini DIY Fascia Controller w/solder pads
The DIY Fascia Controller is also available in this smaller version that handles one bi-color LED in common anode, common cathode or 2-lead form factor, or two single color LEDs.
Designed to make it as easy as possible to interface your own... more ...
more info on Mini DIY Fascia Controller w/solder pads...This item is in Stock and available for dispatch
£3.80
FC_DIY_6_SCREW
N3IX - Mini DIY Fascia Controller w/screw terminals
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles one bi-color LEDs in common anode, common cathode or 2-lead form factor, or two single color LEDs.
An on-board... more ...
more info on Mini DIY Fascia Controller w/screw terminals...This item is in Stock and available for dispatch
£4.75
FC_DIY_SCREW
N3IX - DIY Fascia Controller w/screw terminals
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles up to two bi-color LEDs in common anode, common cathode or 2-lead form factor, or up to four single color... more ...
more info on DIY Fascia Controller w/screw terminals...This item is in Stock and available for dispatch
£5.30
QLNS
N3IX - QuadLN Loconet Servo Driver
QLNS - Versatile, programmable servo driver and Loconet decoder
The QuadLN_S LocoNet® Servo Decoder is the heart of the system and handles servo control, inputs, outputs and LocoNet® communications. Provides complete turnout control of up to 16... more ...
Loconet - Compatible
more info on QuadLN Loconet Servo Driver...This item is in Stock and available for dispatch
£60.00
RELAY
N3IX - QuadLN_S Relay Board
The QuadLN_S Relay Board contains a 5 Volt Relay with DPDT contacts along with drive electronics. The board uses a high sensitivity relay to minimize 5 Volt supply loading and permit many relays boards to be used with a single QuadLN_S. Includes a 12″... more ...
more info on QuadLN_S Relay Board...This item is in Stock and available for dispatch
£11.00
REM
N3IX - QuadLN Remote Aligner
Used with the QuadLN for alignment of servos. Just one of these needed for all of your QuadLNs. Comes with a 6' cable which allows you to stand next to your turnout while aligning the servo
Adjust the travel of your Servos.
Set... more ...
more info on QuadLN Remote Aligner...This item is in Stock and available for dispatch
£16.00
N3IX - Signal Connector Interface Board
Allows Atlas® and other signals the use JST1.25-type connectors to be easily driven by the Signal Board. One Signal Connector Interface Board is used per signal head. Connects to the QuadLN_S Signal Board using separate 3-wire servo cables for the Red,... more ...
more info on Signal Connector Interface Board...This item appears to not currently be in stock
But is still available to order
T.B.C
SIGNAL
N3IX - Signal Board
The QuadLN_S Signal Board add-on provides 24 LED outputs and realistic effects for Searchlights, CPL signals and crossings.
QuadLN_S Signal Board Features
Plugs into the QuadLN_S Exp IO port.
Provides 24 LED... more ...
more info on Signal Board...This item is in Stock and available for dispatch
£19.55
Page (4) of (15)